Crown CDi 6000 Operation Manual
Text of Crown CDi 6000 Operation Manual
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact
your local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every
possible situation which may arise during installation, operation or maintenance.
The
CDi Series Power Amplifiers
Operation Manual
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers
CDi Series Power Amplifiers Operation Manual
page 3
DECLARATION of CONFORMITY
European Representative’s Name and Address:
David Budge
10 Harvest Close
Yateley GU46 6YS
United Kingdom
Equipment Type: Power Amplifiers
Family Name: CDi series
Model Names: CDi1000, CDi2000, CDi4000, CDi6000
EMC Standards:
EN 55103-1:2009 EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professi
CDi Series Power Amplifiers Operation Manual
Table of Contents
Important Safety Instructions...........................2
Declaration of Conformity................................3
1 Welcome...................................................5
1.1 Features.............................................5
1.2 How to Use This Manual......................5
2 Setup.........................................................6
2.1 Unpack Your A
CDi Series Power Amplifiers Operation Manual
page 5
1 Welcome
The CDi Series of Crown® amplifiers are professional
tools designed and built for installed sound applications.
The series includes three models which are identical
except for output power: CDi 1000, CDi 2000, CDi 4000
and CDi 6000. All are rugged and lightweight, and offer
unmatched value in their class.
CDi-Series amplifiers feature an intuitive front-panel LCD
screen to guide installers thro
CDi Series Power Amplifiers Operation Manual
2 Setup
2.1 Unpack Your Amplifier
Please unpack and inspect your amplifier for
any damage that may have occurred during
transit. If damage is found, notify the
transportation company immediately. Only you
can initiate a claim for shipping damage.
Crown will be happy to help as needed. Save
the shipping carton as evidence of damage for
the shipper’s inspection.
We also recommend that you save all pa
CDi Series Power Amplifiers Operation Manual
page 7
Figure 2.3 Input Connector Phoenix Wiring,
Balanced (Top) and Unbalanced (Bottom)
2.4 Choose Input Wire
and Connectors
Crown recommends using pre-built or professionally wired
balanced line (two-conductor plus shield), 22-24 gauge
cables and connectors. At the amplifier inputs, use
Phoenix-style connectors (see Figure 2.3).
Unbalanced lines may be used, but may result in hum or
RF noise over long cab
CDi Series Power Amplifiers Operation Manual
Channel 2
Channel 2
Channel 1
Channel 1
Figure 2.5 System Wiring,
Dual Mode
2 Setup (continued)
2.6 Wire Your System
2.6.1 Dual Mode
Typical input and output wiring is shown in Figure 2.5.
INPUTS: Connect input wiring for both channels.
OUTPUTS: Maintain proper polarity (+/–) on output
connectors.
Connect Channel 1 loudspeaker’s positive (+) lead to
Channel 1 positive (+) terminal of amp; repeat for
CDi Series Power Amplifiers Operation Manual
page 9
2 Setup (continued)
Channel 1
2.6.2 Bridge-Mono Mode
Typical input and output wiring is shown in
Figure 2.6.
NOTE: Crown provides a reference of wiring pin assignments
for commonly used connector types in the Crown Amplifier
Application Guide available at www.crownaudio.com.
OUTPUTS: Connect the speaker across barrier-strip
terminals 1+ and 2+.
IMPORTANT: Set the Bridge/Normal switch in the LCD
screen to
CDi Series Power Amplifiers Operation Manual
2 Setup (continued)
2.7 Connect to AC Mains
Connect your amplifier to the AC mains power source (power
outlet) with the supplied AC power cordset. First, connect the IEC
end of the cordset to the IEC connector on the amplifier; then,
plug the other end of the cordset to the AC mains.
WARNING: The third prong of this connector (ground) is an
important safety feature. Do not attempt to disable this
ground
CDi Series Power Amplifiers Operation Manual
page 11
3.1 Precautions
Your amplifier is protected from internal and external faults, but you
should still take the following precautions for optimum performance
and safety:
1. Before use, your amplifier first must be configured for proper
operation, including input and output wiring hookup. Improper wiring
can result in serious operating difficulties. For information on wiring
and configuration, please con
CDi Series Power Amplifiers Operation Manual
3 Operation (continued)
J. AC Line Connector
NEMA 5-15P (15A).
K. Output Connectors
4-position barrier strip with connectors for dual loudspeakers
or bridge-mono loudspeaker. Dual connectors work with 2-8
ohm or 70V loads. Bridge-mono connectors work with 4-8
ohm or 140V loads.
L. Fan
Front-to-rear forced airflow.
M. Input Connector
Two 3-pin removable Phoenix-type connectors each accept
a balanced line-
CDi Series Power Amplifiers Operation Manual
page 13
3 Operation (continued)
M
N
O
P
J
K
L
J. Line Connector Clip
Mounting points for securing power cord clip.
K. AC Line Connector
NEMA 6-20P (20A).
L. Reset Button
Resets the circuit breaker.
M. Output Connectors
4-position barrier strip with connectors for dual loudspeakers
or bridge-mono loudspeaker. Dual connectors work with 2-8
ohm or 70V loads. Bridge-mono connectors work with 4-8
ohm or 140V loads.
N
CDi Series Power Amplifiers Operation Manual
4 Advanced Features and Options
Figure 4.1
DC Protection
NOTE: For detailed information about these Crown
amplifier features, please consult the Crown
Amplifier Application Guide, available on the Crown
website at www.crownaudio.com.
4.1 Protection Systems
Your Crown amplifier provides extensive protection and
diagnostic capabilities, including output current limiting,
microprocessor-controlled DC protec
CDi Series Power Amplifiers Operation Manual
page 15
4 Advanced Features and Options (continued)
Figure 4.5 LCD Screen and Menu
Navigation Buttons
Figure 4.6 Menu Tree
ICONS
PRESET NAME OR
DSP SETTING
Without correction, the Thermal Protection circuit will
typically reactivate.
4.1.6 DSP Presets and Processes
OVERVIEW
Figure 4.5 shows the LCD screen and the three Menu
navigation buttons: Sel/Enter, Prev/Up and Next/Down.
These buttons let you step through
CDi Series Power Amplifiers Operation Manual
CURRENT PRESET
FLASHING “PRESET” TEXT
FLASHING “PRESET” ICON
Sel
Sel
Sel
Next
USER PRESETS
2-20
DSP OFF
Next
Next
Next or Prev
FLASHING “CONFIG” TEXT
Y
XOV
EQ Ch. 1
EQ Ch. 2
DELAY Ch. 1
DELAY Ch. 2
LIM Ch. 1
LIM Ch. 2
STEREO/BRIDGE MONO
BRIDGE
STEREO
Sel
Sel
Sel
Sel
Sel
Sel
Sel
Sel
Next
Prev
Next
Next
Next
Next
Next
Next
OFF, 90 Hz, 100 Hz, 1200 Hz,
1500 Hz, 2000 Hz, 2-CH SUB,
CUSTOM