Hydro HYDR8 Operation & User’s Manual

3 Easy Steps to let you know the condition of your skin: 1. Remove cap & turn on by pushing gray button 2. Press the metal rods firmly onto your skin/cheek/forehead holding in place until it beeps twice 3. Read analysis chart on the back of the unit HYDR8 detects oil, water, and cellular levels to help balance your skin correctly. It gives an actual reading of your skin to reveal what you cannot see with the naked eye. Using state of the art technology, “Bio-Impedance Analysis (BIA)” to measure water, oil, and skin density, you can use the appropriate beauty products, cleaning methods, and diet to help achieve the ...

1. WATER means moisture/water level of the skin 2. OIL means oil level of skin - On the top columns, “Water and Oil” the bars are shown 1-10 (left to right). - “A” means the optimal level. The higher the levels, the more bars are shown. 3. CELLS SKIN means dead skin cells ratio - Bars shown on the center “0” position means the optimal level. - Bars on the left show the skin has less dead skin cells than optimal. - Bars on right show the skin has more dead skin cells than optimal (time to exfoliate!). Example Analysis Readings D) Chart reference: WATER： Column 1 2 3 4 5 A 6 7 8 9 ...

1. HYDR8 can measure your skin profile score to evaluate the effectiveness of your skin care program against different working environments, seasonal changes, humidity, and even air-conditioned room. These are factors that can affect your skin in different ways. 2. To assess the real performance of skin care products. HYDR8 is a handy measurement tool for cosmetic professionals. 3. To compare the different skin care products and to know which is the most suitable for you. This could let you choose the right skin care products and save you more time and money. 4. After a spa treatment, you can now know the result of your skins impr ...

"combination" skin. Normally, T-zone (the cheeks, forehead, and chin) and the upper back tend to be oilier than other areas of the body. G) Warning: 1. Only use battery: L1154, 1.5V 2. Do not put battery in opposite directions; this may cause damage to HYDR8. 3. Do not use HYDR8 to measure the parts of open cuts, wound or bleeding. 4. Do not use HYDR8 if the person has allergy for metal. 5. Keep the metal rods clean and dry. Clean with a moist cloth and clean water. (Do not use alcohol or other liquid to clean HYDR8) H) ...