Newman Easedale 5 SE Installation & User's Instructions

Multi fuel burning stove. Installation & user instructions. (To be left with customer). Edition 1 Reference: NS-21 Date: 5TH March 2020 ...

The Clean Air Act 1993 and Smoke Control Areas. Hetas Ltd approval. Installation introduction including technical data. 1.0 Technical and emission data. 2.0 Installation introduction 2.1 Unpacking the stove 2.2 Installing the stove 2.2.1 The tertiary air control 2.2.2 Assembling the baffle a ...

 Installation of this stove must be completed in accordance with current local codes and regulations in each country. All local regulations & any rules in force, including those which refer to National and European standards, must be observed when installing this product.  Reference must be made to curre ...

Under the Clean Air Act local authorities may declare the whole or part of the district of the authority to be a smoke control area. It is an offence to emit smoke from a chimney of a building, from a furnace or from any fixed boiler if located in a designated smoke control area. It is also an off ...

Easedale 5 SE Material: Steel and cast iron. Finish: High-temp resistant paint. Fuel: Wood (Approved wood logs) Approved smokeless fuels Log length: 25cm maximum Flue outlet: Top or rear Flue pipe dimension: Internal diameter 125mm / 122.7cm2 cross section Approx. weight: 65kgs Dimensions, distances etc: Figure 2 & 2A Te ...

PM mg/m3 @ 13% 02: 11 OGC mg/m3 @ 13% 02: 79 CO emission mg/m3 @ 13% 02: 1250 NoX mg/m3 @ 13% 02: 109 Emission data Maxibrite smokeless fuel PM mg/m3 @ 13% 02: 13 OGC mg/m3 @ 13% 02: 29 CO emission mg/m3 @ 13% 02: 875 NoX mg/m3 @ 13% 02: 114 2.0 Installation introduction 2.1 Unpacking the stove After removing the outer packaging, remove ...

See figures 1.1 to 1.10 All stove internal parts are assembled at manufacture, however with movements and handling during stove delivery it is possible that some or all of the located parts inside the stove may have moved, therefore it is important to check all these parts for correct position and f ...

handle assembly. Fig 1.7 Banking bar positioning ...