Humanscale Infinity Assembly Instructions Manual
Text of the manual
North America: +1 800 400 0625
Europe: +353 (0)1 858 0910
Asia Pacific: +8522581 0570
DA
NO
SV
PL
21
22
24
19
Infinity
EN
FR
ES
IT
DE
NL
10
11
13
15
17
2
www.humanscale.com/infinity
Important Safety and Care Instructions
Unplug from power source
before cleaning. Wipe clean
with a soft damp cloth. Avoid
ammonia-based cleaners and
abrasives.
Avoid staring directly at light
source.The light source of this
luminaire is not replaceable;
when the light source reaches
its end of life the whole
luminaire shall be replaced.
Do not expose power
Type I (Australia,
New Zealand)
Type G
EU
UK
Parts Included
Desktop Base
Light Assembly
(For all Mounts)
Floor Base
AC Adapter
(Only included for Asia-Pacific/Oceania)
Only use the plug types for countries designated above
AC Adapter
(Only included for USA/Canada)
AC Adapter
(Only includ
Desktop Base Installation
Insert Light Assembly into Base Assembly.
Slatwall Mount Installation
Align Universal Clamp Mount with openings on slatwall. Place the Universal Clamp Mount onto
slatwall. Using a 3 mm Allen Wrench, tighten by turning Bolt clockwise.
Wall Mount Installation
1
Using Wall Mount Bracket, trace mounting holes onto desired location with arrow pointing upward.
2
Secure Bracket to wall with provided hardware.
•If mounting to drywall, use a 5/16”(7.9mm) drill bit for drywall anchor pilot holes.
•If mounting to hardwood, use a 1/8”(3.2mm) drill bit for #10 screw pilot holes.
3
Clamp Mount Installation
Condition 1
If installing Clamp Mount onto a worksurface that is
2” (51mm) or less, orient the Clamp
Mount as depicted.
Condition 2
If installing Clamp Mount onto a worksurface that
is greater than 2” (51mm), orient the Attachment
Bracket as depicted.
The Clamp Mount can easily be converted for
use on thicker work-surface
Floor Mount Installation
1
Insert Light Pole into Base.
2
Place Light Assembly into Light Pole.
3
Remove Light Pole Cover.
4
Plug end of Extension Cable into Power Cable.
5
Insert other end of Extension Cord into hole in Light Pole and route Extension Cable downward.
6 Re-install Light Pole Cover, making sure Extension Cable fits snugly into n
Infinity is equiped with an occupancy sensor
that detects when the user is within range
(1 meter), and turns ON automatically. It will
turn OFF after 15 min of user vacancy.
2
To deactivate Occupancy Sensor, touch and
hold center of touchpad for 3 seconds. The
luminaire will flash and Indicator LED will turn
orange.
3
To activate O