Kobold VKM Operating Instructions Manual

2.  Note .............................................................................................................. 3 3.  Instrument Inspection ..................................................... ...

operation. Follow the instructions precisely as described herein. The instruction manuals on our website www.kobold.com are always for currently manufactured version of our products. Due to technical changes, the instruction manuals available o ...

Any use of the device, which exceeds the manufacturer’s specification, may invalidate its warranty. Therefore, any resulting damage is not the responsibility of the manufacturer. The user assumes all risk for such usage. The models VKM are used for measuring and monitoring of viscous liquid flows (max. 540 mm2/s). ...

A hollow float with a sharp-edged orifice is located within a cylindrical bored metal housing. The flowing medium raises the float against the spring force. The position of the float corresponds to a particular flow rate which may be read from the needle indicator mounted on the instrument. Permanent magnets are ...

Before installation:  It should be confirmed that the maximum allowed operating pressures and operating temperatures of the equipment are not exceeded.  (see table: standard material combinations).  The instruments may be mounted in any flow direction. No recalibration is required when changing positi ...

never be exceeded, even for a short time. For higher switching capacities we recommend the use of contact protection relays (e.g. or model MSR) or any other contact protection device. After your designated external units are connected to the limit contact and adjustm ...

For connection of the power supply and the output signals please check with the operating instructions of the corresponding ADI electronic. Information! The measuring input of the ADI is already factory- set. 7.4. Compact electronic VKM-8... Compact electronic: (..C30R, ..C30M) Compact electroni ...