KNX Module SAS-04.16 Manual 

Text of the manual

The switch actuator receives KNX telegrams and switches up to 4 independent loads. Each output has a bistable

relay, which can be manually controlled. • 4 independent channels for a maximum capacitive load of 140µF • Ability to connect outputs to different phases • Manual control of

Outputs (control channels)

Number of outputs 4 Output type / Disconnection type Potential-free outputs-bistable relay with tungsten pre-make contact / Micro-disconnection Rated current per output 16A/230V AC, 16A/24V DC Capacitive load 140µF Maximum switching voltage 400V AC, 300V DC Maximum load (resistive / ind

Attaching to DIN rail

WIRING DIAGRAMS KNX bus Removing from DIN rail

ATTENTION! Installation and connection of the device to the mains must only be carried out by

qualified personnel! There is a risk of electric shock! Be sure to turn off the power before installing or removing the device! Even when the device is turned off, the output terminals can be live! Do not connect to the outputs a load that exc

Other Controller Manuals