Lenze Smart Motor m300 Project Planning

5 Document description 5 Further documents 5 Notations and conventions 6 Product information 7 Product description 7 Identification of the products 10 Features 10 The modular system 11 Mounting positions 12 Information on project planning 13 Safety instructions 13 Basic safety instructions 13 Application as directed 13 Residual hazards 14 Drive dimensioning 15 Final configuration 17 Surface and corrosion protection 18 Informati ...

42 Connection via QUICKON V2 connector 42 Connection via M15 connector 43 Connection via M12 connector 44 Brakes 45 Spring-applied holding brake 46 Brake resistors 48 Accessories 49 NFC adapter 49 QUICKON connector 50 UMCLN_SGG_100181 51 Purchase order 52 Notes on ordering 52 Product codes 53 Environmental notes and recycling 54 Appendix 55 Good to know 55 Operating modes of the motor 55 ...

Document description This document addresses to all persons who want to carry out any configurations with the products described. The data and information compiled in this document serve to support you in the dimensioning and selection processes and in carrying out the electrical and mechanical installation. You will receive information regarding product extensions and accessories. • The document includes safety instructions which mus ...

This document uses the following conventions to distinguish different types of information: Numbers Decimal separator Point In general, the decimal point is used. Example: 1 234.56 Warning UL warning UL Are used in English and French. UR warning UR Text Programs » « Software Example: »Engineer«, »EASY Starter« Icons Page reference ¶ Reference to another page with additional information Example: ¶ 16 = see page 16 Documen ...

different drives by up to 70 %. Without contactor and starter, with freely adjustable fixed speeds and many integrated functions for technical material-handling applications. The Lenze Smart motor also fulfils the highest requirements regarding energy efficiency and can be conveniently operated by means of a smart phone. Reduction in t ...

to the application as well as for diagnostics). The drive can be adjusted very easily without opening the terminal box. without voltage supply and without time-consuming addressing. Only an NFC-capable Android smartphone or the Lenze NFC adapter for PCs is needed as a tool. The data can therefore be read and written when the drive is in a de-energised ...

With the »EASY Starter« engineering tool (expanded version, »EASY Advanced«“ or »Engineer HighLevel« software licence needed) can be used to adjust the Lenze Smart Products. The relevant version can be easily downloaded from http://www.lenze.com . As the settings are very simple and clear, there is an easy-to-use dialog box, which can be opened directly via the navigator. The corresponding button is directly accessible in the na ...

Belt conveyors Identification of the products Product name of the motor Product series Type Size Overall length Number of pole pairs Motor MSEMA XX (without built-on accessories) 063 - 4 2 (4-pole) MSEMAXX063-42 080 3 MSEMAXX080-32 BR (with brake) 063 4 MSEMABR063-42 080 3 MSEMABR080-32 Features The following figure provides an overview of the elements and connections on the product. Their position, s ...

Values printed in bold are standard designs. Values that are not printed in bold are potential extensions, some of them including a surcharge. Motor MSEMA☐☐063-42 MSEMA☐☐080-32 Technical data Max. torque Nm 7 20 Rated torque Nm 1.75 5.0 Speed setting range rpm -2600 ... -500 / 0 / 500 ... 2600 Dimensions Design B3/B14/B5 Solid shaft with featherkey mm 11 x 23 19 x 40 Output flange mm FT75/FF115 FT100/FT130/FF165 Spring-applied br ...

Mains connection Control terminal Cable gland for terminal box QUICKON V2 connector M15 connector M12 connector E E Position of the manual release lever Product information The modular system Mounting positions 12 ...

Safety instructions Basic safety instructions Disregarding the following basic safety instructions and safety information may lead to severe personal injury and damage to property! • Only use the product as directed. • Never commission the product in the event of visible damage. • Never modify the product technically. • Never commission the product before assembly has been completed. • Never operate the product wit ...

the occurrence of residual risks cannot be fully prevented. The user must take the residual hazards mentioned into consideration in the risk assessment for his/her machine/system. If the above is disregarded, this can lead to severe injuries to persons and damage to property! Product Observe the warning labels on the product! Dangerous electrical volt ...

software, the »Drive Solution Designer«. With the «Drive Solution Designer«, you can design the drive both quickly and to a high quality. The software contains profound and proven expertise with regard to drive applications and mechatronic drive components. Please get in touch with your Lenze representative. Workflow Mains operation Check operat ...

≤ 1000 m ≤ 2000 m ≤ 3000 m ≤ 4000 m Correction factor kH kH kH kH 1 0.95 .90 .85 Determine product on the basis of the forces Transmission element Gear wheels Sprockets Toothed belt pulleys Narrow V-belt ( depending on the preloading) ( depending on the preloading) Additional radial force factor fz ≥ 17 teeth = 1.0 ≥ 20 teeth = 1.0 With belt tightener= 2.0 - 2.5 1.5 - 2.0 < 17 teeth = 1.15 < 20 teeth = 1.25 Without belt ...

Output shaft Output flange Select product extensions and accessories Brake NFC adapter QUICKON connector M15 connector More information about the final configuration: 4The modular system ^ 11 4Product extensions ^ 42 4Accessories ^ 49 Parameters that can be preset by Lenze The parameters marked with "order-dependent" in the standard setting can be preset order-related by Lenze. Standard settings Pa ...

Depending on the ambient conditions, the surface and corrosion protection system (called OKS) offers tailor-made solutions for optimum protection. Various surface coatings ensure reliable functioning even at high air humidity, in outdoor installations, or in the presence of atmospheric contamination. Any color from the "RAL Classic" collection can be chosen for the top coat. For indoor installation in buildings and if no sp ...

Important notes • Install the product according to the information in the chapter "Standards and operating conditions". 4Standards and operating conditions ^ 29 • The technical data and the data regarding the supply conditions can be found on the nameplate and in this documentation. • Ambient media − especially chemically aggressive ones − may damage shaft sealing rings, lacquers and plastics. • Lenze offe ...

Important notes DANGER! Risk of injury and risk of burns from dangerous voltage Power terminals may also carry voltage in the switched-off state or when the motor is stopped and may cause life-threatening cardiac arrhythmia and serious burns. ▶ Disconnect the product from the mains. ▶ Check that the power terminals are deenergized before starting work. • When working on energized products, comply with the applic ...