Marea Smart B58009 Quick Start Manual
Text of Marea Smart B58009 Quick Start Manual
Marea Smart B58009 Please read this manual before using the product to
fully understand its use and operation.
The company reserves the right to modify the contents of
this manual without any further notification. Some
functions may vary in certain versions of software.
Please charge this product with the charger provided for
no less than 2 hours before using it for the first time.Use
only the charger that is included with the product. Make
sure that the charger and the smart watch are properly
connected while charging. Do not charge if the watch ha
Marea Smart B58009 2. Download and install on your phone the official app
that corresponds with your smart watch model.
3. Open the app and enable all the permissions that the
app requests.
4. Turn on Bluetooth on your phone.
5. Make sure that the smart watch has not been linked
directly through Bluetooth to your phone. If so, unlink
it.
6. Pair your Marea Smart through the application (so your
smart watch will be connected via Bluetooth 4.0)
7. On the smart watch, go to Blu
As the Bluetooth protocol may vary from one phone brand
to another, the Bluetooth connection with the smart watch
may sometimes be unstable. To fix the problem, reset the
Bluetooth, pair again, or reset the smart watch. If the
system appears to have stopped, press and hold the power
button for about 10 seconds to restart the smart watch.
Notes on linking:
Only one smart watch pairing application should be
installed on the phone to ensure that the conne
setting method may be different due to different mobile
phone versions and models.
For iPhone: if the phone is in standby or hibernation
mode for a long time (for example, the phone has not
been in use for 2 hours or more and the screen is off), the
application will be closed by the iOS system , so the
application and the watch will be disconnected and the
application functions will not be available. Re-activate
the phone and it will automatically reco
Main functions in Smart watch
Notifications
In phone settings, go to Applications, select the
downloaded application and activate all permissions. Then
go to Notifications and activate all permissions for the
application.
On the app, go to More, go to Notifications and turn on
notifications.
Make sure that all the other applications you want to
receive notifications from on your smart watch have the
permissions enabled to appear in the phone's notification
SMS: Synchronize all text messages on the phone
(feature not yet available for iOs).
Bluetooth
Find the phone you want to connect or disconnect.
Pedometer
Counter of steps taken in the day, calories consumed and
distance walked. Every day at 00:00 all data is automatically
saved and the pedometer resets. Swipe up to see the
options for this feature: status (on / off), history (data from
the last 7 days), goal (select a daily steps goal) and enter
perso
normal heart rate value is between 60 and 90 beats /
minute.
ECG
It uses the combined technology of the optical heart rate
sensor and electrocardiogram. After about 30 seconds, the
data will be displayed on the screen. When the
measurement is finished, the screen will show “ToApp”,
indicating that the data is being transferred to the app to
be saved.
Sedentary reminder
Select an alarm to remind you that it is time to get up and
move.
Wrist movements
Ac
Adjust the volume for calls, notifications, etc.
Alarms
Up to 5 alarms can be programmed, press and hold to stop
an alarm.
Chronograph
Press the icon on the left to start the count and to pause.
Press the icon on the right to save split times.
Energy save mode
On / off (lowers screen brightness and screen-on duration).
Find phone
The paired phone will start ringing. When you have found
it, press “End” on the phone to stop it ringing. You can als