National Instruments IMAQ PXI-1409 Getting Started

Text of the manual

Getting Started with the NI PXI/PCI-1409

The NI PXI/PCI 1409 (NI 1409) is a high-accuracy monochrome image acquisition device for the PXI, PCI, or CompactPCI bus. This document describes how to install and configure the necessary hardware and software components to begin using the NI 1409. What you Need to Get Started You need the following items to set up a

Getting Started with the NI PXI/PCI-1409

2 ni.com • Measurement & Automation Explorer Help for NI-IMAQ—Describes how to configure the NI-IMAQ driver software, NI image acquisition devices, and cameras using Measurement & Automation Explorer (MAX). • NI-IMAQ Help—Contains fundamental programming concepts for the NI-IMAQ driver software and terminology

© National Instruments Corporation

3 Getting Started with the NI PXI/PCI-1409 Measurement Category1: Measurement circuits are subjected to working voltages2 and transient stresses (overvoltage) from the circuit to which they are connected during measurement or test. Measurement Category establishes standardized impulse withstand voltage levels that commonly

Getting Started with the NI PXI/PCI-1409

4 ni.com NI PXI-1409 Note The NI PXI-1409 has connections to several reserved lines on the CompactPCI J2 connector. Before installing a NI PXI-1409 in a CompactPCI system that uses J2 connector lines for purposes other than PXI, refer to the NI PXI/PCI-1409 User Manual for additional information about using the NI PXI

© National Instruments Corporation

5 Getting Started with the NI PXI/PCI-1409 Note Check that the bracket of the device aligns with the hole in the back panel rail of the computer chassis. 8. Secure the device mounting bracket to the back panel rail of the computer. 9. Replace the computer cover. 10. Connect the BNC cable included with the NI PCI-1409 to th

Getting Started with the NI PXI/PCI-1409

6 ni.com Accuracy ................................................................±1.5% of reading Temperature drift ...................................................<250 ppm/°C A/D Conversion Gray levels .............................................................1024 (10-bit) Differential nonlinearity..........

© National Instruments Corporation

7 Getting Started with the NI PXI/PCI-1409 Physical Dimensions NI PCI-1409...................................................10.7 cm × 17.5 cm (4.2 in. × 6.9 in.) NI PXI-1409 ..................................................10 cm × 16 cm (3.9 in. × 6.3 in.) Weight PCI-1409..............................................

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms

of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments

Other PCI Card Manuals