Inspur NF5280M5 Operation & User’s Manual

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Inspur. The information in this manual is subject to change without notice. Inspur is the registered trademark of Inspur. All the other trademarks or registered trademarks mentioned in this manu ...

software configuration, fault diagnosis, etc. that are relevant to the maintenance and operation of this server. It is recommended that server installation, configuration and maintenance is performed by experienced technicians only. Target Audience This manual is ...

2 Product Specifications ...................................................................................................................5 2.1 Introduction ............................................... ...

6.1 Introduction ................................................................................................................................32 6.2 Processor Option ..................................................... ...

9.23 Firmware Update ......................................................................................................................162 9.24 Restore Factory Defaults ............................................... ...

WARNING: Please be advised to follow the instructions below for safety. Failure to do so could result to potential dangers that may cause property loss, personal injury or death. 1. The power supplies in the system may produce high voltages and energy hazards that may cause personal injury. For your safety, please ...

not to block the air vents. 8. Please be sure not to scatter food or liquid in the system or on other components, and do not use the product in humid or dusty environments. 9. Using an incompatible battery may cause explosion. When battery replacement is required, plea ...

2) The products get wet. 3) The products have fallen or have been damaged. 4) Other objects have fallen into the products. 5) The products do not or are unable to function normally even when attempting to operate according to the instructions. 2. If the system becomes wet ...

itself to the sensitive components. You may remove the static electricity on the body by touching the metal earthing objects (such as the unpainted metal surface on the rack). 2) Please do not take electrostatic sensitive components that are not ready to be installed f ...