International Concepts OT-92 Assembly Instructions

REVISED NOV 05, 2014 Printed in Vietnam - 1 - ASSEMBLY INSTRUCTIONS Description Item : LAMP TABLE : OT-92 ...

REVISED NOV 05, 2014 Printed in Vietnam - 2 - BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where ...

REVISED NOV 05, 2014 Printed in Vietnam - 3 - PART LIST When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of the following parts: NO Description Qty Sketch NO Description Qty Sketch A Top 1 D Back 1 B Side frame (L-R) 2 E Top crossbar 1 F Bottom crossbar 1 C Bottom shelf 1 G Drawer 2 HARDWARE LIST When unpacking, please carefully not to discard any par ...

REVISED NOV 05, 2014 Printed in Vietnam - 4 - STEP 1 Attach back (D) and bottom shelf (C) to side frames (B) with bolts (1), washers (2) and (3) as shown below. Tighten with Allen key (4). Attach top crossbar (E) and bottom crossbar (F) to side frames (B) with screws (5) as shown below. Tighten with a screwdriver. ...

REVISED NOV 05, 2014 Printed in Vietnam - 5 - STEP 2 Attach the unit to top (A) with screws (5) as shown below. Tighten with a screwdriver. STEP 3 Insert drawer (G) into the unit. Attach knob (6) to the drawer front with pan head screws (7) as shown below. Tighten with a screwdriver. ...