Greenlite Airz Installation Manual

and more comfortable. Follow these easy steps to get started. Greenlite Products offers installation and product videos Please visit greenliteusa.com. To contact Greenlite Technical Support, please call 267.417.3277. For more information about installation settings, please visit greenliteusa.com Th ...

Table of Contents 1. Start Here ......................................................................................... 2-5 2. Installing with a C-Wire ..............................................................6-9 3. Installing with Power Wire (Included) .............................10-13 4. Installing with Power Bridge ......... ...

Step 1.1: Download the free Greenlite Thermostat App to your mobile device and create an account. Step 1.2: Set your phone aside and turn off the power at the circuit breaker to both your heating and cooling systems before performing any wiring. Step 1.3: Confirm that your heating and cooling system is powered down by changing the temperat ...

1. START HERE Step 1.5: Use the included wire labels to mark which wire is connected to each terminal in your old thermostat. Take a picture of your current wiring layout, you will need this picture later. Step 1.6: Confirm that you have a C-Wire. If you do, please turn to the next page. If you do not, please skip ahead to page 10. 1 1 ...

Installing with a C-wire Before starting Turn off the power at the circuit breaker to both your heating and cooling systems before performing any wiring. STOP Step 2.1: Identify your system configuration (see wiring diagrams in appendix). Potential configurations include: • Conventional 1H/1C (Y, G, W, R, C) • Conventional 2H/1C (Y, G, ...

INSTALLATION WITH C-WIRE 2. Step 2.2: Remove each wire from its terminal – make sure that they don’t fall down back into the wall. Step 2.3: Remove the mounting screws from the base of the old thermostat. Remove the base from the wall. Step 2.4: If you would like to use the trim plate or wall anchors, you can install them now. Step ...

Option 1 - Conventional (Furnace) Systems: Step 2.6(f): Following the terminal labels marked “Conventional” on the thermostat base, loosen the screw and insert each labeled wire into the top hole of the corresponding terminal, tighten the screw. Step 2.7(f): If you have both an RC and RH wire present, then remove the red cap located on ...

Installation with C-wire Step 2.8: Securely fasten Greenlite AirzTM onto its base. Once it has clicked into place, return power to your heating and cooling system. Step 2.9: After your thermostat powers up, you are ready to configure Greenlite AirzTM for your heating and cooling system and connect to a wireless network. Please skip ahe ...

Installing without a C-Wire Using the Power Wire (included) Before starting Turn off the power at the circuit breaker to both your heating and cooling systems before performing any wiring. STOP 1. Install and wire Greenlite AirzTM 2. Install Power Wire (at your furnace) For installation without C-wire, you will need to access your furnace ...