Grundfos UPM3 Assembly Instructions
Text of Grundfos UPM3 Assembly Instructions
Assembly instructions | Grundfos UPM3 Auto L 15/70
Introduction
Grundfos UPM3 Auto L 15/70 is a compact,
energy-saving and high-performance pump spe-
cifically developed for the OEM market. LK uses
UPM3 Auto L in several products because of its
good characteristics.
The pump has ten different setting options, three
curves for Proportional Pressure, three curves for
Constant Pressure and four curves for Constant
Curve. The recommendation
Assembly instructions | Grundfos UPM3 Auto L 15/70 Display
Indication
Operation
Action
Red LED,
Yellow LED
#3
Electric
fault
Pump stops
because of
low voltage or
serious fault
Check voltage
to pump / Re-
place pump/
impeller*
*Release impeller using screwdriver PH2. Break the
voltage to the pump. Insert the screwdriver into the
center hole of the drive side, press the screwdriver in
about 5 mm, then rotate forward /backward until the
imp