Kettler RHS 4ft Bench Assembly Instructions
Text of Kettler RHS 4ft Bench Assembly Instructions
Screw (M7 x 90)
D
Seat Assembly
B
Screw (M6 x 40)
E
Side Frames
C
Allen Key
F
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings.
3. Assemble this product on a soft surface.
4. To ensure an
Ensure the bench
is protected during
assembly to avoid
damage to the
surface
Assemble all parts
loosely and when all
components are in
place tighten fixings
to secure
D
A
B
C
D
A
B
C
E
C
For your safety
• This product may only be used for its intended purpose for residential premises. Any other uses may affect the warranty.
• Remove dust regularly with a clean soft brush and wipe down with a clean damp cloth. Use pads, mats and coasters under
plates, glasses cups etc to protect them from scratches, spills, stains and heat damage. Wipe spills immediately to prevent
staining.
• Cushions are available for this range. They need to be s