M-system M2XPA2 Instruction Manual

Text of M-system M2XPA2 Instruction Manual

P. 1 / 5

EM-5060 Rev.6 FREQUENCY TRANSMITTER (PC programmable) MODEL M2XPA2 INSTRUCTION MANUAL BEFORE USE .... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. If you have any problems or questions with the product, please contact M-System’s Sales Office or representatives. ■ PACKAG

P. 2 / 5

EM-5060 Rev.6 COMPONENT IDENTIFICATION ■ HOW TO OPEN THE LEFT SIDE COVER Insert the tip of a minus driver into the openings indicated with arrows in the figure, and pull up the cover. ■ HOW TO CLOSE THE LEFT SIDE COVER Place the side A first and push in the parts B, gently not to break the enclosure. INSTALLATION Loosen the fixing screw a

P. 3 / 5

EM-5060 Rev.6 TERMINAL CONNECTIONS Connect the unit as in the diagram below or refer to the con- nection diagram on the side of the unit. CHECKING 1) Terminal wiring: Check that all cables are correctly con- nected according to the connection diagram. 2) Check DIP switch setting. 3) Power input voltage: Check voltage across the terminal 13

P. 4 / 5

EM-5060 Rev.6 ADJUSTING DETECTING LEVEL (voltage pulse, two-wire current pulse only) Appropriate detecting level is determined according to the flow chart below. START Confirm the Sensitivity Scale in Table 1 below. Assign the value in the following equation. Detecting Level (V)*1 = DC Offset (V)*2 × Sensitivity Scale Set DIP SW to t

P. 5 / 5

EM-5060 Rev.6 M-SYSTEM WARRANTY M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such product was originally purchased if such product has been used under normal operating conditions and properly maintained, M-System’s so

M-system Transmitter Owners Instructions: