Julian Bowen Eclipse Bunk Bed ECL101 Assembly Instructions Manual

Product Code - ECL101/ECL102/ECL103 Approximate Assembly Time People Required to Assemble Tools Required 1hr ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Before you start... Please carefully unpack and lay out all of the component parts to ensure nothing is missing and to check each component for any obvious damage. Should you identify any concerns at this stage please contact the retailer from whom this product was purchased. Please quote your order number, details of your issue, the product code, and the batch number from the cartons which will help to resolve your issue as quickly as possible. Version Number - 1.0 1785mm 2402mm 1503mm

We strongly advise that you do not use Power Tools, such as drills or electric screwdrivers during the assembly as this may cause irreparable damage and will invalidate your warranty. Please check all hardware matches the list below. Should you notice any are missing please contact your retailer. 63PCS 65PCS 2PCS 94PCS Cam Stud Cam Contractfix Dowel M8 x 25mm 2PCS M8 x 50mm A B C D E F G H J K 13PCS 9PCS 8PCS M6 x 50mm M4 x 22mm M4 x 45mm 8PCS M4 x 38mm 8PCS M4 x 30mm L Q R S T 29PCS 13PCS 7PCS M3.5 x 14mm M6 Round Nut M6 x 13mm 16PCS M6 x 40mm 21PCS M6 x 50mm

We strongly advise that you do not use Power Tools, such as drills or electric screwdrivers during the assembly as this may cause irreparable damage and will invalidate your warranty. Please check all hardware matches the list below. Should you notice any are missing please contact your retailer. 4PCS Castor 24PCS Sticker 2PCS Drawer Stopper 1PCS Braket 1PCS Hole Plug 10mm U V W X Y Z 9PCS 8PCS 9PCS M6 x 35mm M6 x 25mm M6 x 20mm 1PCS M6 x 12mm 19PCS M6 30PCS M6 x 30mm M P N Z1 Z2 2 SET 14" Drawer Slide 1PCS Circle Stopper 8PCS PVC Back Support 34PCS Felt Pads 2PCS M4 Z3 Z4 Z5 Z6 Z7

05 06 07 08 26 28 29 30 60 x8 04 20 03 09 10 11 16 18 19 35 36 37 38 39 40 41 41 42 44 45 48 49 50 52 x2 53 x2 54 x2 55 x2 56 57 46 58 59 47 43 43 48 51 PARTS Please ensure you carefully check all the pieces, should you have any concerns please contact the retailer before assembly commences. Please have your order number, details of the issue, the product code, and the batch number from the cartons as this will help us to resolve your issue much faster. Page : 5 of 51

six years due to the risk of injury from falls. WARNING - Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the bed, for example, but not limited to ropes, st rings, cords, hooks, belts and bags. WARNING - Children can become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g.cupboards) and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining structure shall not exceed 75mm or shall be more than 230mm. WARNING - Do not use the bunk bed / high bed if any structural part is broken or missing. It is recommended that you always follow the manufacturer's instructions to assemble this product. Always follow the manufacturer's recommended mattress size, as per these instructions and the bunk bed / high bed maximum mattress height marking on the item: Recommended Mattress Size: 90cm x 190cm (UK Single) with Minimum Depth of 17.0cm It is necessary to frequently ventilate the room in order to keep the humidity low and to prevent mould in and around the bed. Please periodically check all the fixings of the item and re-tighten when necessary. This item conforms to European Safety Standards - BS EN 747-1: 2012 + A1: 2015. Page : 6 of 51

commence. Keep these instructions for future reference. Unpack, inspect and check off all of the contents. Please dispose of all packaging safely. Small component parts could choke a child if swallowed. We strongly recommend that you keep children well away from the work area. It would be sensible to lay a sheet or blanket on the floor where you intend to work to avoid scratching this product and to protect your floor. This product is heavy. Take extreme care when lifting to avoid personal injury or damage to the product. Assemble the product as close to its intended final position in the room as possible. HANDY HINT: If you keep the hardware in a bowl during assembly you will be less likely to lose them. Page : 7 of 51 150.3cm 240.2cm 178.5cm We strongly urge that you do not use Power Tools, such as drills or electric screwdrivers during this assembly as this could cause irreparable damage to your product and will invalidate the warranty. "WARNING: In order to prevent overturning this product must be used with the wall attachment device provided."

ASSEMBLY ADVICE Please take the time to carefully read through these instructions before you commence. Keep these instructions for future reference. We advise that the product is assembled in the room it is intended for. We advise that you keep the hardware in a bowl during assembly to avoid losing anything. We strongly recommend that you keep children away from the work area. Small component parts could choke a child if swallowed. We recommend you use a sheet or blanket to protect both floor and product through the assembly stages. This product is heavy, and we recommend a 2 person lift to avoid personal injury or damage to the product. Never push or pull the product as this could cause both personal injury or irreparable damage to product or floor. We have tried to make this piece of furniture easy to assemble if the instructions are followed carefully. In the unlikely event that you have problems with assembling the product or have missing or damaged parts, please contact your retailer and we will assist them in rectifying the problem as quickly as possible. Please remember we strongly urge you DO NOT use power tools such as drill or electric screwdrivers as this could cause irreparable damage to your product and will invalidate your warranty.

ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE WRONG � CORRECT � B x 14 A x 14 D x 27 A 10 D 11 12 13 14 16 17 18 Page : 9 of 51

ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE WRONG � CORRECT � 02 B x 18 D x 22 A x 8 A D 01 03 04 06 07 05 Page : 13 of 51

To Assembly the Drawer Slide, Please Follow Step as Below M x 2 BACK FRONT Last Hole Second Hole M L L L L L M L L M 40 Page : 23 of 51

M x 2 BACK FRONT Last Hole Second Hole To Assembly the Drawer Slide, Please Follow Step as Below L L L M BACK FRONT Last Second Hole Third Hole To Assembly the Drawer Slide, Please Follow Step as Below 36 M L L L L L L M M Page : 24 of 51

ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE WRONG � CORRECT � 32 A B x 8 D x 10 A x 6 D 33 34 45 35 Page : 25 of 51

35 A Z2 x 8 33 34 35 x 3 x 3 A A 35 Part 32 , 10mm 10mm Z2 32 33 34 45 32 35 34 35 Z2 Z2 Z2 Z2 Z2 Z2 Z2 Z2 Z2 Page : 26 of 51

ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE WRONG � CORRECT � 36 B x 9 D x 9 A x 5 37 38 39 40 44 E x 2 47 E A D Page : 27 of 51

36 38 39 Part 39 200mm Part 36 10mm 200mm 10mm 36 39 Z2 39 37 with Edging 35 Z2 Z2 Z2 Z2 Z2 Z2 Z2 Page : 28 of 51 x 1 x 1

ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE WRONG � CORRECT � B x 2 D x 2 D D B 08 Page : 32 of 51

ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE WRONG � CORRECT � 24 B x 8 A x 8 C x 2 Q x 2 D x 14 D A C 25 26 27 29 28 Q C Q Page : 38 of 51

Z2 x4 A Z2 Part 28 , 10mm 10mm 29 Z2 Z2 Z2 29 28 x 4 29 24 25 26 27 28 Z2 Z2 A Page : 39 of 51

D x 8 A x 4 H 53 x2 H x 8 D A 54 x2 56 57 78 79 80 Do This Step 2 Times Do This Step 2 Times H H H 52 53 54 55 x 2 x 2 56 57 Page : 48 of 51

L x 8 M x 2 sets Do This Step 2 Times Do This Step 2 Times K x 4 N x 4 K x 4 N x 4 150mm 150mm K N K N L 150mm 150mm L Page : 49 of 51

GENERAL CARE & MAINTENANCE We advise that when cleaning the product that a damp cloth is used. Avoid the use of all household cleaners and abrasive. Never push or drag the furniture. Never attempt to move the furniture when fully loaded. We advise that periodically all fixing are re-tightened.