D-Link DSM-G600 Manual 

D-Link Systems, Inc. Table of Contents Table of Contents Package Contents ............................................................................3 System Requirements ......................................................................3 Introduction ............................................................................ ...

D-Link Systems, Inc. Package Contents Note: Using a power supply with a different voltage than the one included with the DSM-G600 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. Package Contents  D-Link DSM-G600 Wireless Network Storage Enclosure  ...

D-Link Systems, Inc. Introduction Introduction D-Link, an industry leader in networking, introduces the DSM-G600 Wireless Network Storage Enclosure. Connect your existing hard drives* to the home or office network and create additional storage space with the DSM-G600 Wireless Network Storage Enclosure. With the DSM-G600, you can c ...

D-Link Systems, Inc. Features and Benefits Features and Benefits *Hard drives and USB drives not included. Attach up to two USB drives* (FAT/FAT32) for additional storage  Wireless Storage Enclosure for adding a hard drive* to the network  Insert a 3.5” PATA/IDE hard drive* to increase network storage space  One Gigabi ...

D-Link Systems, Inc. Hardware Overview Hardware Overview Front Panel LAN LED Solid indicates an Ethernet connection. Blinking indicates traffi c at the Ethernet port. HDD LED Indicates activity on the internal hard drive. Power LED Solid indicates the DSM-G600 is ready. Blinking indicates startup, formatting, or a reboot. WLAN LED ...

D-Link Systems, Inc. Hardware Overview Rear Panel Reset Button Pressing the reset button for 10 seconds with a paper clip will restore the unit to the original factory default settings. The button is inside the hole to prevent an accidental reset. USB 2.0 Ports Use these ports to connect USB 2.0 drives. USB 1.1 drives may also be c ...

D-Link Systems, Inc. Installation Overview When you have completed the steps in this Quick Installation Guide, your connected network may look similar to this: Installation Overview ...

D-Link Systems, Inc. Hardware Installation A. Unscrew the two screws on the back panel of the DSM-G600 to remove the cover. B. Connect the IDE cable to the IDE cable connector on your hard drive. Note: Make sure the jumper setting on your hard drive is set to Master or Cable Select. C. Connect the power cable to the power connector ...

D-Link Systems, Inc. Hardware Installation D. Use the mounting screw to secure the hard drive to the DSM-G600. E. Replace the cover and screw the two screws on the back panel of the DSM-G600. F. Connect an Ethernet cable to the Ethernet jack located on the back of the DSM-G600 for initial setup. Note: It is required that an Ether ...