D-Link DES-6000 Operation & User’s Manual
Read Online
Read the D-Link DES-6000 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
User’s Guide Second Edition (April 2001) 6DES6000..02 Printed In Taiwan RECYCLABLE ...
ABOUT THIS GUIDE................................................................................................................................................................V CONVENTIONS ............................................................................................................................................................................ V OVERVIEW OF THIS USER’S GUIDE.............................................. ...
Diagnostic (Console) Port (RS-232 DCE).............................................................................................................................19 IP ADDRESSES AND SNMP COMMUNITY NAMES...................................................................................... ...
Browse GVRP Status..............................................................................................................................................................................75 Browse GMRP Status ........................................... ...
About This Guide v ABOUT THIS GUIDE This User’s Guide tells you how to install your Modular Ethernet Switch, how to connect it to your Ethernet network, and how to set its configuration using either the built-in console interface or Web-based management. Conventions References in this manual to the DES-6000 are frequently written simply as “Switch” or “Switches” where the text applies to both models ...
Introduction 1 1 INTRODUCTION This section describes the features of the Switch, as well as giving some background information about Ethernet/Fast Ethernet, Gigabit Ethernet, and switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies are prop ...
2 Introduction cabling, outfitting your network with a powerful 1000Mbps-capable backbone/server connection creates a flexible foundation for the next generation of network technology products. Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting am ...
Introduction 3 ♦ Ears and screws for rack mounting Modules The following describes the optional plug-in modules available for the switch. CPU Module ♦ A single CPU module must be present and must be installed in first (uppermost) slot. ♦ Layer 2 switching based on MAC address & VLAN ID. ♦ Store and Forward packet switching. ♦ Broadcast Storm rate filtering. ♦ Supports static filtering (based on MAC address ...
4 Introduction ♦ IEEE 802.3x-compliant Flow Control support for Full-duplex ♦ Per port packet buffer: 0.5 Mbytes 100BASE-FX (MT-RJ) Module ♦ 12 100BASE-FX (MT-RJ) Fast Ethernet ports ♦ Fully compliant with IEEE 802.3u 100BASE-FX ♦ Back pressure Flow Control support for Half-duplex mode ♦ IEEE 802.3x compliant Flow Control support for Full-duplex ♦ Per port packet buffer: 0.5 Mbytes 1000BASE-T (RJ-45) Mod ...
Introduction 5 ♦ Input: 90 ~ 264 VAC, 47 ~ 63Hz ♦ Output: 3.3V: 4A ~ 60A ♦ 12V: 0.1A ~ 2A ...
6 Unpacking and Setup 2 UNPACKING AND SETUP This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One switch chassis ♦ One management module (pre-installed in uppermost slot) ♦ One power supply module (pre-installed) ♦ One mounting kit: four mounting brackets and ...
Unpacking and Setup 7 Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the device and the objects around it. Figure 2-1. Switch installed on a Desktop or Shelf Rack Installation The Switch can be mounted in an E ...
8 Unpacking and Setup Installing Modules The DES-6000 supports up to 9 modules which can be installed into the module bays. Networking modules are warm-swappable, meaning they can be added and removed while power to the switch is ON. After warm- swapping a networking module, the switch will automatically be rebooted. Make sure to use the Save Changes command to save the current configuration to NV-RAM before warm-swap ...
Unpacking and Setup 9 Figure 2–4. Installing a Module Connecting a Terminal The DES-6000 can perform basic switching functions without special configuration, but to use the Switch’s advanced features you must first configure the unit through a terminal (a VT-100 serial data terminal or a computer running a VT-100 emulator). The connection is made through the Switch’s Diagnostic RS-232 port, which is configured ...
10 Unpacking and Setup ♦ All indicators blink momentarily to indicate a system reset. ♦ The Power indicator flashes for about 20 seconds while the switch prepares its run-time software and performs a self-test. ♦ The Power indicator begins shining steadily, and the remaining indicators begin reflecting port and system status. Power Failure As a precaution, the Switch should be unplugged in case of an impending p ...
Identifying External Components 11 3 IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, side panels, optional plug-in modules, and LED indicators of the Switch Front Panel The front panel of the Switch consists nine slide-in module slots for networking modules, two slide-in module slots for power supply modules, an RS-232 communication port, and LED indicators. Figure 3-1. Front panel view of the ...
12 Identifying External Components Optional Plug-in Modules The DES-6000 Modular Ethernet Switch is able to accommodate a range of plug-in modules in order to increase functionality and performance. 10BASE-T/100BASE-TX Module Figure 3-2. 16-port, 10/100BASE-TX module ♦ 16-port, front-panel module. ♦ Connects to 10BASE-T and 100BASE-TX devices at full- or half-duplex. ♦ Supports Category 3, 4, 5 or better UTP or ...
Identifying External Components 13 ♦ Fully compliant with IEEE 802.3u 100BASE-FX ♦ Back pressure Flow Control support for Half-duplex mode ♦ IEEE 802.3x compliant Flow Control support for Full duplex ♦ Per port packet buffer: 0.5 Mbytes ♦ Supports multi-mode fiber-optic cable connections of up to 412 meters in half-duplex or 2 km in full-duplex mode. 1000BASE-T (RJ-45) Module Figure 3-4. 2-port, 1000BASE-T ...
14 Identifying External Components ♦ 2 1000BASE-SX (MT-RJ) Gigabit Ethernet ports ♦ Fully compliant with IEEE 802.3z ♦ Supports Full-duplex operation only ♦ IEEE 802.3x-compliant Flow Control support ♦ Per port packet buffer: 2 Mbytes 1000BASE-SX (SC) Gigabit Module Figure 3-6. Two-port, 1000BASE-SX gigabit module ♦ Two-port, front-panel module. ♦ Connects to 1000BASE-SX devices at full duplex. ♦ 2 10 ...
Identifying External Components 15 Power Supply Modules ♦ Dual power modules design with current sharing design ♦ Full redundant feature design to ensure continuous operation ♦ If one power module failed, the other will take over all current supply automatically. ♦ Hot-swappable/Hot-pluggable capability ♦ Power management functions ♦ Input: 90 ~ 264 VAC, 47 ~ 63Hz ♦ Output: 3.3V: 4A ~ 60A ♦ 12V: 0.1A ~ ...
