Manhattan Comfort Hampton Technical Information

Text of Manhattan Comfort Hampton Technical Information

W: 26.77" H: 46.46" D: 21.26"

ASSEMBLY VIDEO Technical information Maximum supported weight Tools needed (not included) 11Lb 11Lb

BACK COVER (DRILLED)

01 07 BACK COVER 02 08 FEET 04 09 ADJUSTABLE SHELF 02 10 LEFT DOOR 01 11 RIGHT DOOR 01

- Insert the hardware (H) into the parts (02, 04).

- Insert the hardware (B) into the part (01). - Connect the part (02) onto the part (01) with the hardware (C). - Connect the part (03) onto the part (02) with the hardware (A). - Connect the part (04) onto the parts (01, 03) with the hardware (C+A). - Connect the part (05) onto the parts (02, 04) with the hardware (A). H H H H H H H B B B B 01 04 02 02 01 03 A A A A H 08x B 04x C

- Connect the parts (08) under the part (05) with the hardware (A).

- Connect the parts (06, 07) with the hardware (I+J). - Insert the parts (09) as showed above. I 34x 09 09 06 07 07 A A A 08x 05 08 08 08 08 L USE THE GLUE (L) BEFORE FASTENING THE FEET (08). 08 J 02x

Attention! This step is very important!

- Connect the hinges (F) into the parts (10, 11) with the hardware (D). - Connect the part (11) onto the part (02) and the part (10) onto the part (04) with the hardware (D). You need to attach the furniture on the wall to avoid any tip over risk. Follow the procedures as showed below. WALL Approach as close as possible to the wall. M Pass the hardware (M) through the hole of the part (06) as s

*Press the hardware wings (E) to put in the hole that you

drilled in the wall. Hardware (E), plugged in the wall. E M K G K Connect the hardware (M) onto the wall with the hardware (G). Then fasten with the hardware (K) the hardware (M) on the part (01).

Manhattan Comfort Indoor Furnishing Owners Instructions: