D-Link DI-634M Quick Install Manual

©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-634M (08/18/2005) Version 2.0 Before You Begin 1. If you purchased this router to share your high-speed Internet connection with other compute ...

Router To Your Network A. First, connect the power adapter to the receptor at the back panel of the DI-634M and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. 1. Power off your Cable or DSL modem; some devices may not have a on/off ...

Connecting Additional Computers To The DI-634M When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-634M. LOCAL NETWORK ...

Home screen will appear. Using The Setup Wizard The logon pop-up screen will appear. Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. Select admin from the user name drop-down menu and leave the password field blank. Click Log in to continue. Click Run Wizard ...

You will see the following screens Set up your new password. You have the option to establish a password. Click Next Click Next Choose your time zone from the drop-down menu. Click Next ...

screen will appear: Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address. The Setup Wizard (continued) Select your Internet Connection. You will be prompted to select the type of Internet connection for ...

If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet), and this option is selected, then this screen will appear: Enter in the username and password provided to you by your ISP. Please be sure to remove any existing PPPoE client software installed on your computers. Please continue to Wireless Setup on page 8. Click Ne ...

your 802.11g network, the DI-634M offers WEP and WPA security. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication. The Setup Wizard (continued) Enter the SSID and select a channel from the drop-down menu. Wireless Setup If your ISP uses Big Pond, and this op ...

Click Restart The Setup Wizard (continued) If you wish to use WEP, select the encryption level (64 or 128-bit) and enter your WEP key. The key must be the same on all your of wireless clients. Click Next If you wish to use WPA-PSK, enter your passphrase (between 8 - 63 characters). This passphrase must be the same on all of your wir ...

The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear Select Built-in Ethernet in the Show pull down menu Click on Network Click on Apply Now Select Using DHCP in the Configure pull down menu To connect to the network, make sure the network adapter in your computer is ...