GREAT PLAINS BD7600 Operator's Manual

this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Illustrations may show optional equipment not supplied with standard unit. ! Table of Contents Original Instructions 195-614M Great Plains OPERATOR MANUAL MODEL BD7600 40 Foot 3-Section Drill DrillCommand Version 02.02.04.00 Min-Till Drill ...

manual. If you or the dealer have added options not originally ordered with the machine, or removed options that were originally ordered, the weights and measurements are no longer accurate for your machine. Update the record by adding the machine weight and measurements with the option(s) weight and measurements. ...

Congratulations on the purchase of your Great Plains product. Great Plains welcomes you to its growing family of new product owners. Your product has been designed and built by skilled workers using quality materials. Your dealer has performed the necessary pre-delivery service to your machine, and will advise you of the proper maintenance and operating practices that will give you long, satisfactory use of your machine. Do not hesitate to ...

All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. Tradem ...

Cover Great Plains | 195-614M | 11/05/2020 v Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Intended Use Statement . . . . . . . . . . . . . . . . . . . 1 Prohibited Use . . . . . . . . . . . . . . . . . . . . . . . . 1 Machine Identification . . . . . . . . . . . . . . . . . . . . . 1 Directional Information . . . . . . . . . . . . . . . . . . . . . 1 Target Group for Operator Manua ...

vi 40 Foot 3-Section Drill Cover Parking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Parking with Drill Folded. . . . . . . . . . . . . . . . 43 Parking with Drill Unfolded . . . . . . . . . . . . . . 43 Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Opener Adjustments . . . . . . . . . . . . . . . . . . . . . 45 Opener Leveling. . . . . . . . . . . . . . . . . . . . . . ...

Table of Contents Introduction Great Plains | 195-614M | 11/05/2020 1 Introduction The BD7600-40 Drill is a towed seeding implement. This three section min-till drill has a working width of 40 feet (12.2 m) and folds to a width of 16 feet (4.9 m) for transport. The seed metering system is ground drive or hydraulic drive.  Intended Use Statement The BD7600-40 Drill with standard equipment and/or authorized attachments and options ...

2 40 Foot 3-Section Drill Table of Contents Introduction  Target Group for Operator Manual Simplified Illustrations Illustrations of the machine in the operator manual are shown without protective equipment - or with the protective equipment open - for better understanding. Be sure to observe the safety information and follow the handling instructions in the operator manual. Serious or fatal injury may be caused as a ...

Table of Contents Safety Information Great Plains | 195-614M | 11/05/2020 3 Safety Information The safety symbol indicates a potential safety hazard to persons operating or near the machine and advises on how to avoid it. The notice symbol indicates a potential for machine or property damage from operator error and advises on how to avoid misuse. The information symbol indicates useful - but not crucial - information for machine ope ...

4 40 Foot 3-Section Drill Table of Contents Safety Information Handling and Disposing of Chemicals Agricultural chemicals can be dangerous. Improper use can seriously injure persons, animals, plants, soil and property. 1. Read chemical manufacturer’s instructions carefully, and then take appropriate precautions before use. 2. Wear protective clothing. 3. Wash hands and face before eating after working with chemicals. ...

Table of Contents Safety Information Great Plains | 195-614M | 11/05/2020 5 High Pressure Fluids 1. Escaping fluid from holes in hydraulic lines is difficult to spot. Do not use your hands or bare skin to search for suspected leaks; instead, use a piece of cardboard or wood. If injured by escaping hydraulic fluid, see a medical professional immediately. Exposure can result in gangrene or severe allergic reaction. 2. Check that hydra ...

6 40 Foot 3-Section Drill Table of Contents Safety Decals Safety Decals Your implement comes equipped with safety reflectors and decals in place. Read and follow decal directions. Keep all safety decals clean and legible. Replace all damaged, faded, or missing decals. Order new decals from your Great Plains dealer. Refer to this section for proper decal placement. When ordering new parts or components, also request corr ...

Table of Contents Safety Decals Great Plains | 195-614M | 11/05/2020 7 Amber Reflectors 838-265C One reflector on the outside end of each wing walkboard, two on the rear of each wing walkboard, and one on each end of center walkboard. Two reflectors under each wing walkboard. Daytime Reflectors 838-267C Two reflectors on the rear of center walkboard. Two reflectors under center walkboard. 71490C 71490D 71490B 71490A ...

8 40 Foot 3-Section Drill Table of Contents Safety Decals Negative Tongue Weight Hazard 818-019C One decal on the tongue near the hitch. Pinch/Crush Hazard 818-045C One decal on each side of the tongue near the transport hooks One decal on each end of the center section. Excessive Speed Hazard 818-337C One decal on the tongue near the hitch. WARNING NEGATIVE TONGUE WEIGHT HAZARD Negative tongue weight can cause immediat ...

Table of Contents Safety Decals Great Plains | 195-614M | 11/05/2020 9 High Pressure Fluid Hazard 818-339C One decal on the tongue near the hitch. Falling Hazard 818-398C Two decals - One decal on each end of rockshaft. Two decals - One decal on outside of each gauge wheel mount. Pinch Point Hazard 818-579C One decal on the front of each marker. 71491 71492 71492A 71474 ...

10 40 Foot 3-Section Drill Table of Contents Safety Decals Overhead Hazard 818-580C One decal on the front of each marker. General Instructions 818-587C One decal on the tongue near the hitch. Falling Hazard 838-102C One decal on the end of each wing near the ladder. Hydraulic Failure Hazard 844-146C One decal on left end of rockshaft near transport lock. 71474 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca. ...

Table of Contents Safety Decals Great Plains | 195-614M | 11/05/2020 11 Tire Inflation and Wheel Bolt Torque 844-147C One decal on each gauge wheel mount. General Hazard 848-512C One decal on the tongue near the hitch. Radar Hazard 848-577C One decal on the left side of the tongue above the transport tires. Tire Inflation and Wheel Bolt Torque 858-773C One decal on each transport wheel mount. 844-147C Torque wheel bolts to 76 lb-ft ...

12 40 Foot 3-Section Drill Table of Contents Safety Decals Pinching/Crushing Hazard 858-950C One decal on the tongue near the hitch. Lubrication Notice 858-679C One decal on each end of each drill box frame. 71491 71502 ...

Table of Contents Preparation and Setup Great Plains | 195-614M | 11/05/2020 13 Preparation and Setup This section helps you prepare your tractor and drill for use. Before using the drill in the field, hitch the drill to a suitable tractor to inspect the systems and setup the drill.  Pre-Setup Checklist  Read and understand “Safety Information” beginning on page 3.  Check that all working parts are moving freely, bolts ...

14 40 Foot 3-Section Drill Table of Contents Preparation and Setup Drill Hitches The drill has the following hitch options:  Clevis hitch  Single-tang, large hole  Single-tang, small hole  Scharmüller Cat 3  Cat 3/4 swivel hitch Use the clevis hitch with tractors that have single-tang draw bars. Use the single-tang hitch for tractors with clevis draw bars. Always use a locking-style hitch pin sized to ma ...