D-Link DCS-1130 - mydlink-enabled Wireless N Network Camera Operation & User’s Manual

Manual Overview This manual contains the following sections: Section 1 - “Product Overview” describes what is included with the DCS-1130 camera, and things to consider before installing (page 1). Section 2 - “Installation” describes how to install the camera on your network (page 7). Section 3 - “Configuration” describes how to configure the settings on your DCS-1130 camera (page 11). Section 4 - “Troubleshoo ...

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries. All other company or product names mentioned herein are trademarks or registered trademarks of their respectiv ...

Table of Contents Manual Overview...........................................................i Manual Revisions..................................................... ii Trademarks.............................................................. ii Product Overview.........................................................1 Features...................................................................2 Package Contents................. ...

Section 1 - Product Overview Congratulations on your purchase of the DCS-1130 Wireless N Network Camera. The DCS-1130 is a versatile and unique solution for your small office or home. Unlike a standard webcam, the DCS-1130 is a complete system with a built-in CPU and web server that transmits high quality video images for security and surveillance. The DCS-1130 can be accessed remotely, and controlled from any PC/Notebook over ...

Section 1 - Product Overview • Simple to Use: The DCS-1130 is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards. Setup is simple with Camera Setup Wizard technology, which helps automatically configure your camera’s network settings, eliminating the need to set complicated settings on your router. • Supports a Variety of Platforms: Supports TCP/IP networkin ...

Section 1 - Product Overview DCS-1130 Wireless N Network Camera and Antennas Power Adapter CAT5 Ethernet Cable Camera Base and Mounting Kit Quick Installation Guide CD-ROM Package Contents Note: Using a power supply with a different voltage rating than the one included with the DCS-1130 will cause damage and void the warranty for this product. If any of the above items are missing from your package, please contact your retaile ...

Section 1 - Product Overview System Requirements Network Requirements • Wired (10/100 Fast Ethernet) network • Wireless 802.11n/g/b network CD Setup Wizard Requirements • An Internet connection • A router connected to your broadband modem Computer with the following: • A PC with a wired connection to your router • Windows® XP or Vista® (32/64-bit) • Internet Explorer 6 or higher with ActiveX controls enabled We ...

Section 1 - Product Overview Hardware Overview Front Reset Button Resets the camera to factory defaults when pressed for 10 seconds. WPS Button Allows you to connect to a WPS router. Focus ring Turning the ring will allow you to focus the camera. Camera microphone Picks up sound from the surrounding area. Camera lens Records video from the surrounding area. Status LED Lights up and changes color to indicate the camera’s stat ...

Section 1 - Product Overview Hardware Overview Back Power jack Connects to the power adapter. Ethernet port Connects to a PC or network through an Ethernet connection. Antenna connectors Connects to the wireless antennas. Camera base mounting points Allows you to attach the camera base or another mounting unit. ...

Section 2 - Installation Insert the Installation CD-ROM into your computer’s CD-ROM drive to start the autorun program. The CD-ROM will open the Camera Setup Wizard. Simply click Start to go through the Setup Wizard, which will help you through the entire installation process from connecting your hardware to configuring your camera. Starting the Camera Setup Wizard Installation ...

Section 2 - Installation Hardware Installation Attach the Antennas Screw the wireless antennas onto the antenna connectors. Connect the Camera to the Camera Base 1. Screw the two camera base pieces together. 2. Screw the camera base into the mounting point on either the back or the bottom of the camera and tighten the collar. You can adjust the angle and pivot of the camera by loosening the wheel and retightening it after movi ...

Section 2 - Installation Connect the Ethernet Cable Connecting to a router Connecting to a broadband modem Connect one end of the blue Ethernet cable included in your package to the Ethernet port on the back of the DCS-1130 camera. Connect the other end of the cable to an available LAN port on your router or broadband modem. Attach the power adapter to the power jack located on the back of the DCS-1130 and connect the power ad ...

Section 2 - Installation Connecting to a Wireless Network Using WPS If your router supports WPS connection, you can connect your camera using the WPS button on the camera. Press and hold the WPS button on the side of the camera for three seconds. The status LED on the front of the camera will turn blue. Press the WPS button on your router within 60 seconds. The WPS button is usually on the front or side of your router. On som ...

Section 3 - Configuration Using the Configuration Menu After completing the Camera Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS-1130. At the end of the wizard, click Go To Camera, or enter the IP address of your camera into a web browser, such as Internet Explorer®. To log in, use the User name admin and the ...

Section 3 - Configuration Web-based Configuration Utility Use the following sections to set up and configure your network camera: • LIVE VIDEO • SETUP • MAINTENANCE • STATUS • HELP ...

Section 3 - Configuration Live Video Video Profile: There are four different viewing profiles, which you can configure in Setup > Audio and Video. Full Screen: This allows you to view the video in full screen mode. To exit full screen mode, press the ESC key on your keyboard. Snapshot: Click to capture a snapshot image. The image will pop up in a new window. You may save this image to a local hard drive. Record Video: Clicki ...

Section 3 - Configuration Setup The setup wizard guides you through the initial setup of your IP camera. You can use the Internet Connection Setup Wizard for initial network setup, and you can use the Motion Detection Setup Wizard to set up motion detection and snapshots. Simply follow the instructions given in each step of the wizard to quickly set up your camera. Alternatively, you can manually set up your Internet connecti ...

Section 3 - Configuration Network Setup allows you to configure your LAN and Internet configuration. DHCP Connection: This allows your camera to get an IP address automatically from your router or Internet service. If you are not sure which LAN settings to use, try using DHCP mode first. Static IP Address: This allows you to manually set the IP address information for your camera. IP Address: Enter the IP address the camera s ...

Section 3 - Configuration Enable UPnP: Universal Plug & Play (UPnP) allows Windows PCs to find this camera under “Network Neighborhood” without configuration. Enable UPnP port forwarding: If your router supports UPnP, this will allow the camera to communicate which ports the camera needs to access the Internet so that the router can forward those ports automatically. This will enable you to access your camera over the Int ...