impact LS-BHA Instructions Manual

The Impact LS-BHA Baby Ballhead Adapter lets you turn any light stand or adapter with a 5/8-inch baby pin into a platform for mounting ball or pan & tilt tripod heads. Add functionality to a light stand or combo stand by using the LS-BHA to attach a standard photo or video head with a 3/8-16 mounting thread. By rem ...

2. Setscrews (×3) 3. Locking knob 4. 11⁄8 in. junior pin 5. Alternate locking knob position 6. 5/8 in. baby receiver 1 3 5 2 6 4 ...

Loosen the locking knob, and slide the adapter onto a 5/8-inch baby pin. Tighten the knob until secure. Junior Receiver Installation Remove the locking knob, and insert the adapter into a 11⁄8-inch junior receiver. ...

1. Screw a head onto the 3/8-16 mounting thread. Make sure the head is tight and flush with the baseplate. 2. Use a slotted screwdriver to tighten the three set screws and secure the head to the baseplate. Top Mount 3/8-16 male Bottom Mount 11⁄8 in. (28 mm) stud 5/8 in. (16 mm) receiver Base Diameter 2.2 in. (55.8 mm) Material Alumin ...

This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited wa ...