Flexispot S05P Installation Manual
Text of Flexispot S05P Installation Manual
Attach the arms, one on each side, to the bottom of the seat cushion by tightening the screws
into the holes on the seat plate (as shown in the picture).
Actual parts and sizes may vary;
Additional screws are available for each type of screw;
Unit: PCS/piece
x1
x1
x1
x1
x1
x1
x2
x1
x7
First, attach the backrest (B) to the support frame (C) and secure it with one (E) screw and 2
(F) screws, then open the buckle on the chair cushion (A) and insert the support frame into
the hole on the cushion. Lock the buckle (as shown in the figure).
Assemble the upper half of the chair to the chassis and lock it with 1 (H) screw (as shown in
the picture).
03
04
Use and Maintenance
05
06
Seat Height
Use the lever below
the seat to raise or
lower the seat to
your ideal height.
Backrest Tilt
Turn the knob to
adjust the backrest
to the desired
position.
1. Keep chair away from direct sunlight to prevent degrading of fabric over time.
2. Do not use detergent with harsh chemicals to clean your office chair. Avoid contact with
acid, alkali or other corrosive liquids.
3. To prevent water stains or water