Argos 642/0110 Assembly Instructions Manual

Text of Argos 642/0110 Assembly Instructions Manual

Impressions - Overbed Unit

642/0110 Assembly Instructions - Please keep for future reference Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call Customer Helpline 0844 880 6770 Dimensions Width - 228cms Depth - 41.5cms Height - 51.5cms 642/1841 KA5882/02

Safety and Care Advice

Important - Please read these instructions fully before starting assembly 2 • Check you have all the components and tools listed on pages 2, 3 and 4. • Remove all fittings from the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting. • Do not stand or put weight on th

Components - Panels - Exploded Veiw

Please check you have all the panels listed below 3 Components - Fittings Please check you have all the fittings listed below If you have damaged or missing components, call the Customer Helpline 0844 880 6770 Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. Plan view of panels on page 4 Panel pins x 50 E Half cranked hinge x 12 F A

Components - Panels - Plan Veiw

Please check you have all the panels listed below 4 Side (50 x 40 cm) x 6 Top/base (73 x 39.6cm) x 6 Corniche/Batton (76 x 8 cm) x 6 Shelf (73 x 28 cm) x 3 Door (49.5 x 37 cm) x 6 Back (74.8 x 49.5 cm) x 3 1 2 3 4 5 6

Fitting metal dowels

Screw metal dowels into panel Note: Insert metal dowels as far as shown. Repeat for the other five panels Do not over tighten. Fitting hinge plates Screw hinge plates into panel Note: Unscrew centre screw on hinge plate before attaching to panel (see illustration) Repeat for the other five panels Do not over tighten Do not use power/electric screw drivers to attach the hinge plates. Pleas

Cam lock in open

position Cam lock in closed position Attaching panels Position top/base and side secure by turning cam locks clockwise Do not over tighten. Position shelf onto side and by turning cam locks clockwise Do not over tighten. Note: Repeat above to make two further sections. X 3 Attaching panels Position top/base and side secure by turning cam locks clock

Argos Indoor Furnishing Owners Instructions: