Bush Hog BBC 48 Operator's Manual

807 $4.00 50047324 BBC 48 / BBC 60 Box Blades Operator’s Manual BUSH HOG ® ...

The care you give your Bush Hog implement will greatly determine your satisfaction with its performance and its service life. We urge a careful study of this manual to provide you with a thorough understanding of your new implement before operating, as well as suggestio ...

UNDER THE BUSH HOG WARRANTY It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment. It ...

authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and municipalities’ use and ninety (90) days for commercial use ...

BOX BLADES BEFORE DELIVERING MACHINE — The following check list should be completed. Use the Operator’s Manual as a guide. r 1. Assembly completed. r 2. All fasteners torqued to specifications given in Torque Chart. r 3. All decals in place and readable. (See decal page.) r 4. Overall condition good (i.e. paint, welds) r 5. ...

In addition to the design and configuration of equipment, hazard control and accident prevention are depen- dent upon the awareness, concern, prudence and proper training of personnel in the operation, transport, maintenance and storage of equipment. Lack of attention to safety can result in accident, personal injury, reduction o ...

EMPLOYERS, EMPLOYEES AND OPERATIONS. *(This section is intended to explain in broad terms the concept and effect of the following federal laws and regulations. It is not intended as a legal interpretation of the laws and should not be considered as such). U.S. Public Law 91-596 (The Williams-Steiger Occupati ...

Mast Scarifier Shank Top Center Link Mounting Position DURING BLADE ADJUSTMENT KEEP BODY, HANDS AND FEET CLEAR OF BLADE. ATTACHMENT The box blade should be placed on level ground. Place the tractor rockshaft control in “position con- trol” (non-floating) for attaching and detaching the rear mounted blade. “Draft control” ...

rear using adjustments on the tractor’s 3-point lift. To adjust the scarifier shanks, first remove the pins which hold the shanks in place. Slide the shanks up or down to desired position and replace the pins. (Figure 3) The scarifiers should be adjusted to the lowest posi- tion to penetrate and ...

can occur to safety decals either through shipment, use or reconditioning, Bush Hog will, upon request, provide safety decals for any of our products in the field at no charge. Contact your authorized Bush Hog dealer for more information. 8 ...