FISCHER MS11 Instruction Manual

Text of FISCHER MS11 Instruction Manual

This manual contains detailed

information about the product, and instructions for its installati- on, operation and maintenance. Operators and other technical personnel responsible for the equipment must read this thoroughly before attempting to install or operate this equipment. A copy of this manual

Modification or other technical alteration of the product is

not permissible. This also applies to the use of unautho- rized spare parts for repair / maintenance of the product. Any modifications to this product, if and as necessary, should be done only by Fischer Mess- und Regeltechnik GmbH. 1.6. Operational Restrictions The o

Make electrical connections to the instrument through

a suitable fuse. 5. Commissioning Power supply and signal cabling to the instrument must be correctly selected to meet operational requirements, and installed in a way that does not cause physical stress to the instrument. • The pressure line must have a downward gradient throughout, from the pres

The instrument is inherently maintenance-free.

However, to ensure reliable operation and maximize the operating life of the instrument, it is recommended that the instrument, its external electrical and process con- nections, and external connected devices be regularly in- spected, e.g.: • Check the display. • Check the switching output

0 ... 400 mbar up to 0 ... 25 bar (s. Ordering Code)

Nominal pressure 25 bar Max. pressure overpressure proof to nominal pressure (all measuring ranges), safe against negative pressure Perm. ambient temperature -10 ... +70°C Perm. media temperature 70°C Degree of protection IP54 per DIN EN 60529 Mounting positio

Dimensions (all units in mm unless stated otherwise)

Electrical connections MS11 Standard rear connection shank connection shank per DIN EN 837 M16x1.5 plastic connection M16x1.5 plastic connection connection shank per DIN EN 837 M20x1.5 cable connection cable terminal box or 7-pole plug connection panel cutout ø104 MS11 Panel mounting MS11 Wall mount

FISCHER Measuring Instruments Owners Instructions: