Custom Autosound BLUKIT Quick Start Manual
Text of Custom Autosound BLUKIT Quick Start Manual
Connecting a Bluetooth device requires first connecting the
BLUKIT Bluetooth interface module. When connected to a
Custom Autosound CD ready head unit, the BLUKIT sup-
ports the HFP (hands-free profile), A2DP (advanced audio
distribution profile).
Preparation
Before you can use a mobile device with this head unit, it
must be paired and connected. Please make sure that Blue-
tooth is activated on your mobile
Switching between radio modes:
To listen to your Bluetooth enabled device the radio must be
in CD mode.
If using a CD changer and you wish to switch between CD
and Bluetooth follow the procedure for your model of radio.
USA-630 to switch between Bluetooth and CD press the
CD/Mode button 5 times. Pressing the CD button 5 time
again will switch back to the previous mode.
USA-66 to switch between Bluetooth and CD press the CD
button 4 times rapidly to switch