Daewoo SF-7200D Instruction Manual

Advantages of This Product Are .... ....................... 5 Read Carefully before Using .................................... 6 Identification of Controls .......................................... 7 Remote Control ......................................................... 11 Installation Connecting up your player with RF lead........ ...

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suff ...

lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14 DISC TRAY Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury. 15 OVERLOADI ...

Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. ✔Installation place and handling • When you place this player near other devices, they may affect poorly together. • When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected). • When you place this player ...

Operation Display Window Identification of Controls ! POWER CORD It is a jack for supplying power to the unit. Connect to outlet in a wall. @ AUDIO OUTPUT Jack # COMPONENT OUTPUT Jack $ DIGITAL OUTPUT (COAXIAL) Jack To enjoy sound quality of theater level in home, connect this jack with amp or unit embedded with digital audio decoder. % A/V OUTPUT Jack ^ A/V INPUT Jack & Connection to ANTENNA Cable * Conne ...

Remote control 2 Batteries RF cable Instruction Manual • To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But, instruction manual is not sold additionally. • Operate remote control within 7m from the unit. • Do not press 2(two) buttons at the same time. • Do not light up sending and receiving part of remote control. • Do not keep in the ...

Connecting up your player with RF lead I Before you start, unplug all the equipment from the mains supply. (Option 1) - How to connect with RF lead I Before you start, unplug all the equipment from the mains supply. (Option 2) - How to Connect with Audio/Video jack Aerial The type of aerial you should use, depends on local interference and how far you are from the transmitter. You should contact a l ...

Connecting with Other VCR or Camcorder How to Connect with Jack in Front Panel INPUT 1 OUT VIDEO (L) AUDIO (R) ANT IN INPUT 2 REAR PANEL OF DVD-VIDEO REAR PANEL OF TV RF CABLE How to Connect with Jack in Rear Panel INPUT 1 OUT VIDEO (L) AUDIO (R) ANT IN INPUT 2 REAR PANEL OF DVD-VIDEO REAR PANEL OF TV RF CABLE ¡ Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack i ...

How to Connect with Stereo Unit such as Audio Connecting to a television with Component jack and a Dolby Digital Amp. How to Connect (L) AUDIO (R) REAR PANEL OF DVD-VIDEO REAR PANEL OF STEREO UNIT ¡ Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to IN jack of stereo sound unit. ™For Input Select in stereo unit, Select “External Input” connected with DVD-Video. £ Playback DVD disc or Hi- ...

I Switch the TV on. I You can also start "AUTO SEARCH" in the SETUP "PR PRESET" ➝"AUTO SEARCH". I To tune in new stations (manual tuning) and to enter station names see page 27-28. SETUP:END PLEASE WAIT... CH 25 You should see this picture the first time you switch on the TV and player. Select the wanted language with PR+ or PR- button. Press OK to confirm. 2 Press on t ...

Output Select Press [DVD] button. If DVD mode is correctly selected, DVD on the operation display window is lit. Then, REMOTE button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the OPERATION mode. Press [VCR] button. If VCR mode is correctly selected, DVD on the operation display window goes out. Then, REMOTE button works as VCR function. Press the [VCR] button, then it bec ...

Press [DVD] button of REMOTE to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, making its label look upward. Insert the disc and press [OPEN/CLOSE] button to close the tray. The disc tray is closed and after checking the disc’s condition, Playback or Stop function starts to operate. 1 2 3 To playback it, press [PLAY/PAUSE] button ...

Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT into DVD mode and press [PLAY] button. Then, you can watch DVD. 22 If you want to watch a TV channel during DVD recording with video, press [VCR] button to convert OUTPUT into VCR mode and press [PR+/-] button. Then , you can watch a TV channel. Press [ ] button to power on. • P ...

program for the desired time, follow the procedures below. 11 First, follow the steps 1 to 4 in “Recording With VCR”. 22 Press [REC] button as much as you want. See the “Recording Times Table” below. Once continuous recording until you press STOP button Twice recording for 30 mins from current time 3 (times) recording for 1 ...

this. Call this menu (just see the previous page), if it isn't displayed. Select NAME position. Press the [0] button to change the given name. Or press the [1] button to create the station name. 1 Either select the name from the stored list or you create the station name and enter a 4-digit name. Change the letters with the [PR +/–] b ...

I Load a cassette with its safety tab in place and with sufficient free space for the recording. Press "SETUP", choose "TIMER PROGRAM". Press OK. Choose a free programme location. Press OK. You will be asked if you want to record "ONCE", "WEEKLY" or "DAILY". Please decide and confirm with OK. 1 Type in one after the other: • The programme loca ...

beginning! The counter does not count unrecorded parts of the tape. I If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). Each time you press [DISPLAY] button, 1x: Time and date+current status ➝Time and date 2x: Counter+current status ➝counter 3x: disappear. • If didn’ ...

I On the mono VCR, you will hear the normal mono sound. In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with a high-quality Hi-Fi sound system. This means you can enjoy • films with excellent stereo sound • films of full-length concerts in high quality stereo • films with impressiv ...

Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique for smooth edit points: • The symbol is lit in VCR mode and goes out in TV mode. • This symbol means the cassette is in. • This symbol means a timer recording is setting. For the best results, the source cassette from which you are recording should already be playing back when you start recording. Assembling To m ...

At the point where you want to start the repeat playback, press [A-B] button. The right figure appears and repeat playback start position (A) is set. 1 At the point where you want to end the repeat playback, press [A-B] button again. The repeat playback end position (B) is set and a defined period from A to B is playback repeatedly. 2 To exit from repeat playback mode, press [A-B] button. I ...