Daewoo DRV-4705B Instruction Manual

` A mac001 1200DPI 90LPI

Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your DVD Recorder. • Read this page and chapter ‘Setting up your DVD Recorder’ to help you set up and adjust your product correctly. • Do not put the DVD Recorder in a hot or humid place. • Do not open the DVD Recorder. Get a qualified technician to carry out any repairs. • Do not connect the DVD Recorder to the power supply if you have just moved it from a cold environment to a warm room. This can lead to condensation inside the DVD Recorder, which can damage it. Wait for approx. 2 hrs for it to reach room temperature. • Make sure the DVD Recorder is placed at least 10 cm apart from other home appliances or obstacles to ensure sufficient ventilation. • The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on top of the recorder. • Before a storm and/or lightning, unplug the DVD Recorder from the mains supply and aerial. • Put the recorder on a steady flat surface. • Only clean the recorder with a soft, lint-free cloth. Do not use harsh or alcohol- based cleaning agents. For your own Safety • There are no components in this product you can service or repair yourself. • Do not open the case of the DVD Recorder. Only allow a qualified engineer to repair or service your DVD Recorder. • This DVD Recorder is designed to work continuously. Switching it off (stand- by mode) does not disconnect it from the mains. To disconnect it from the mains you have to unplug it. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` i mac001 1200DPI 90LPI

LASER This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure. Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated. DO NOT STARE INTO THE BEAM. DANGER Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. CLASS 1 LASER PRODUCT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage‘ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • Make sure the unit should be placed at least 8cm apart from the other home appliances or the obstacles to get sufficient ventilation. • This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on this unit. • Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` ii mac001 1200DPI 90LPI

assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3 HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5 CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6 ATTACHMENTS Do not use attachments unless recommended by the unit’s manufacturer as they may cause hazards. 7 WATER AND MOISTURE Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. 8 ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult as well as serious damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or table recommended by the manufacturer. 8A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 9 VENTILATION Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 10 POWER SOURCES This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. 11 POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. 12 LIGHTNING For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 13 DISC TRAY Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury. 14 OVERLOADING Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock. 15 OBJECT AND LIQUID ENTRY Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or ‘short-out’ parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. 16 BURDEN Do not place a heavy object on or step on the product. The object may fall, causing serious PORTABLE CART WARNING (symbol provided by RETAC) DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` iii mac001 1200DPI 90LPI

product. 17 DISC Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 18 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19 DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. E. If the unit has been dropped or the cabinet has been damaged. F. When the unit exhibits a distinct change in performance-this indicates a need for service. 20 REPLACEMENT PARTS When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the unit manufacturer can prevent fire, electric shock, or other hazards. 21 SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks recommended by the manufacturer to determine that the unit is in safe operating condition. 22 WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 23 HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 24 To prevent battery electrolyte leakage, which may result in injury and damage to the unit or other objects, observe the following precautions; A. All batteries must be installed with the proper polarity. B. Do not mix new with old or used batteries. C. Only use batteries of the same type and brand. D. Remove the batteries when they are not to be used for a long period time. E. When the batteries have become discharged, they must be disposed of in a safe manner which complies with all applicable laws. 25 WEEE (Waste Electrical and Electronic Equipment) The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipment waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product. By ensuring the correct disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment with your household waste. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. 26 RoHS (Directive 2002/95/EC) Compliant This environment-friendly product does not contain the EU RoHS restricted substances (Pb, Hg, Cd, Cr6+, PBB, and PBDE). DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` iv mac001 1200DPI 90LPI

INTRODUCTION Connecting Antenna/Cable ____________________11 Connecting a TV _______________________________12 Connecting an Amplifier/Receiver _____________13 Connecting Optional Equipment ______________14 Connecting a Digital Camcorder ______________14 CONNECTIONS Initial Installation ______________________________15 Setup __________________________________________17 ‘Installation’ Settings 17 ‘Recording’ Settings 21 ‘Language’ Settings 22 ‘Preference’ / Video Settings 23 ‘Preference’ / Audio Settings 24 ‘Preference’ / Parental Controls 25 Auto Setting 27 ‘System’ / System Info 28 ‘System’ / DivX(R) VOD DRM 28 ‘System’ / Restore Defaults 28 Disc Operation ________________________________29 Disc Initialize 29 Disc Operation 29 Title Edit _______________________________________32 Edit Menu 32 SETUP On-Screen Display Overview __________________34 DVD Playback _________________________________36 Other Disc Playback __________________________40 PLAYBACK Basic Recording________________________________43 Recording from TV 43 One Touch Record (OTR) 44 Checking the Recording Time 44 To Pause the Recording 44 Timer Recording _______________________________45 Recording from an External Input _____________48 RECORDING Troubleshooting _______________________________50 Technical Specifications ________________________53 REFERENCE Table of Contents Table of Contents DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 1 mac001 1200DPI 90LPI

What is a DVD? DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc. How good is the resolution of DVD compared with VHS? The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line. This is more than twice as high as VHS and even better than laser disc quality. DVD picture quality is easily comparable to the digital masters produced in recording studios. What is a DVD+RW? DVD+ReWritable uses ‘phase change‘ media, the same technology on which rewritable CDs are based. A high- performance laser is used to change the reflective properties of the recording layer; this process can be repeated more than a thousand times. What is a DVD+R? Unlike a DVD+RW disc, a DVD+R (write-once DVD) can only be written to once. If it is not finalized after a recording, further recordings can be added to it. Old recordings can be deleted but they can no longer be overwritten. The deleted recordings (titles) are marked 'deleted title'. Before a DVD+R can be played in a DVD player, it must be finalized in the DVD Recorder. Once this process is complete, no further recordings can be added. What can I do with my DVD Recorder? Your DVD Recorder is a machine for recording and playing back digital video discs with ‘two-way‘ compatibility with the universal DVD video standard. This means: • existing DVD video discs can be played on the recorder. • recordings made on your DVD Recorder can be played on other DVD video players and DVD-ROM drives. Dual Media Supporting Disc ±RW / ±R Recording Format ±Disc + VR format Finalise -RW, -R, +R After finalize other DVD playback All disc can playback Consumer Does not need selection (recording format) Remark : A DVD Recorder that supports ‘dual media’ recording allows DVD+RW format recording (+VR) on either DVD-R, DVD-RW, DVD+R or DVD+RW media. Any editing feature that is available with the +RW logical format is available on any of the media types. This system allows the flexibility for the consumer to use any of the above media formats for recording in the same system. Since the +VR format is DVD-Video compatible, the consumer can take any disk recorded on this platform and should be capable of playing it back on the majority of DVD players on the market. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 2 mac001 1200DPI 90LPI

The main film, accompanying feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a number to enable you to easily locate the chapter you want. Depending on the disc, chapters may not be labeled. Track (Audio CD only) Sections of a movie or a musical piece on an audio CD. Each track is assigned a number, enabling you to easily locate the track you want. Which discs you can use The following discs can be used in your DVD Recorder: Playback and recording DVD+RW (Digital Versatile Disc + ReWritable) DVD-RW (DVD-Rerecordable) DVD+R (Digital Versatile Disc + Recordable) DVD-R (DVD-Recordable) Playback only DVD Video (Digital Versatile Disc) VCD (Video CD) Audio CD (Compact Disc Digital Audio) CD-R (CD recordable) Audio/ CD-RW (CD rewritable) Audio Video Format : JPEG Audio Format : CDDA / MP3 Not all recordable CDs may be played by your player. Regional code If the region number on your DVD disc does not correspond to the region number of this player, the disc cannot be played. 2 ALL Overview DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 3 mac001 1200DPI 90LPI

• The recording times shown are not exact because the DVD Recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. • Discs recorded at high speeds (equal to or greater than 2X) may not be recognized. • If you record still pictures or audio only, the recording time may be longer. • The displayed times for recording and time remaining may not always add up to the exact length of the disc. • The available recording time may decrease if you heavily edit a disc. • When using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before you start a recording session, check the amount of recording time left on the disc. Recording TV Audio Channels The DVD Recorder can record one or two channel audio. For TV broadcasts, this usually means mono or stereo, but some programs are broadcast in bilingual audio channel. You can record either BIL I, BIL II or both. Restrictions on Video Recording • You cannot record copy-protected video using this DVD Recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen. • Video that is ‘copy-once only’ can only be recorded using DVD+RW discs with CPRM. Copyright Notice • Audio and video recordings you make using the DVD Recorder are for your personal use only. You may not sell, lend, or rent them to other people. • This product incorporates copyright protection technology that is protected by method claims of certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited. Handling the Unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc. To keep the surface clean Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They will leave marks on the surface. Precautions About DVD Recording DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 4 mac001 1200DPI 90LPI

To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obtain a clear picture The DVD Recorder is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: Within 23 ft (7 m) of the remote sensor. Angle: Within 30° in each direction of the remote sensor. Remote Control Battery Installation Detach the battery cover on the rear of the remote control, and insert two AAA batteries. Make sure the polarities (+ and -) are aligned correctly. AAA AAA Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature increase inside the car. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center outward. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. Notes on Discs About the Symbol ‘ ‘ may appear on the TV screen during operation. This icon means the function explained in this User's Guide is not available on that specific disc. About Symbols No Yes Overview DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 5 mac001 1200DPI 90LPI

@ Disc Tray (DVD deck) Insert a disc here. # Front Panel Display Shows the current status of the DVD Recorder. $ PLAY/PAUSE Starts playback of a disc. Pauses playback or recording temporarily. % STOP Stops playback. ^ PREV Skips to previous chapter. & OPEN/CLOSE Opens or closes the disc tray. * REC Starts recording. Press repeatedly to set the recording time. ( NEXT Skips to next chapter. ) PR+/– Scans up or down through memorized channels. Also moves up and down in DVD navigation menus. 1 AVF (VIDEO, L-AUDIO-R) Connects to the audio/video output of an external source (VCR, Camcorder, etc.). 2 DV IN Connects to the DV output of an external source (Digital Camcorder). Identification of Controls Identification of Controls ! @ # & ( * ) 1 2 $%^ DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 6 mac001 1200DPI 90LPI

Channel Identification of Controls Pr10 TV Channel CC23 CATV Channel Input mode Av-1 AV1 input Av-2 AV2 input F-Av Front AV input DV DV input Recording on disc 1 1 : 1 5 Indicates a DVD Timer recording is set. 1 1 : 1 5 Indicates a DVD Timer Recording is in standby mode. 1 1 : 1 5 Indicates the DVD is recording. Indicates the dts title is playing. RECP Recording Pause mode 0:30 OTR Recording mode Others SAFE Indicates when the DVD Recorder is locked. TV Indicates the DVD Recorder is in TV mode. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 7 mac001 1200DPI 90LPI

details, Refer to One Touch Record (OTR) on page 44. - Starts playback. - Pauses playback or recording temporarily. Press again to exit Pause mode. Selects Recording mode: Approx 1 Hour (HQ mode), 2 Hours (SP mode), 4 Hours (EP mode), 8 Hours (SEP mode) Selects a subtitle language, if available. Selects an audio language (DVD), audio channel (CD) or audio type (TV). 8 Identification of Controls Remote Control - Turns the DVD Recorder on and off. - Lock the front panel by pressing and holding it over 5 seconds in power on status. - Unlock the front panel in stand by off status. Opens and closes the disc tray in DVD mode. Switches the DVD Recorder input to Tuner, AV1, AV2, AVF or DV. Displays a disc’s Title menu, if available. Switches between the DVD Recorder tuner and your TV tuner. Displays or exits the Setup menu. Displays information about the currently loaded disc or TV channel. Displays the Timer Recording menu. Confirms menu selections. - œ √…† : Selects menu options. - PR(+/–) : Selects channels. Accesses DVD disc menus. Shows the general information of the loaded DVD disc. It is hot key of “Disc info” in “Setup” menu. Clears all characters in edit box when changing disc name or channel name. - Selects numbered options in menus. - Selects TV channels. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 8 mac001 1200DPI 90LPI

Displays the finalize menu for DVD±R, DVD-RW discs. Selects a DVD camera angle, if available. Displays the edit menu for recordable DVD disc. Repeats the current chapter, track, title or the entire disc. Repeats playback between two points (A and B). Increases or decreases the slow motion speed when playing a DVD. Identification of Controls Searches backward/forward. Skips to the next or previous chapter/track. Progressive Scan Mode • If your TV supports Progressive Scan, you can view high quality video by setting the DVD Recorder to Progressive Scan mode. If your TV does not support Progressive Scan, do NOT change to Progressive Scan mode. • As component outputs have their own Jacks on the back side, change the TV input into Component input, after connecting the component cables from the DVD Recorder to TV. • Changing from Interlace or Progressive to RGB, should be the opposite of above. Stops playback or recording. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 9 mac001 1200DPI 90LPI

Connect to a TV with an RF coaxial input. @ ANT IN (FROM ANT.) Connect to your antenna or cable TV outlet. # Scart socket 2 Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, etc.) $ Scart socket 1 Connection of a TV set. Composite-output and RGB-output. % AUDIO OUT (L-AUDIO-R) Connect to other equipment with audio inputs. ^ COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr) inputs. & COAXIAL (Digital Audio Out) Connect to an amplifier with a coaxial digital audio input. * AC Power Cord Plug into a power outlet. Rear panel Identification of Controls ! @ * $ Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the DVD Recorder. # ^ % & DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 10 mac001 1200DPI 90LPI

your TV. 2 Connect this cable to the jack marked ANT IN (FROM ANT.) on the rear panel of the DVD Recorder. If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the ANT IN (FROM ANT.) jack on the rear panel of the DVD Recorder. Use the supplied coaxial cable to connect between the DVD Recorder’s OUT (TO TV) jack and the antenna input jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels (all cable channels). • There are a variety of ways to connect the DVD Recorder to your TV and other equipment. Use only one of the connections described below. Whichever TV connection you use will work with all input sources. • Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best connections. • For better sound reproduction, connect the DVD Recorder’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 13. Caution • Make sure the DVD Recorder is connected directly to the TV, and the TV is set to the correct video input. • Do not connect the DVD Recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. • Do not connect the DVD Recorder via your VCR. The DVD image could be distorted by the copy protection system. Connections Connections Antenna Antenna Flat Wire (300 ohm) 300/75 ohm Adaptor (Not supplied) Cable TV Wall Jack OR OR Rear of DVD Recorder Antenna Antenna Cable TV Wall Jack Flat Wire (300ohm) 300/75ohm Adapter (Not supplied) or or DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 11 mac001 1200DPI 90LPI

• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD Recorder’s Progressive Scan output for the highest video resolution possible. • If your TV does not accept the Progressive Scan format, the picture will appear scrambled. 1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder to the corresponding in jacks on your TV using an optional Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on your TV. 2 Connect the Left and Right AUDIO OUT jacks from the DVD Recorder to the left/right audio in jacks on your TV using the supplied audio cables. Choose one of the following TV connections, depending on the capabilities of your equipment. RF Connection Connect the ANT OUT (TO TV) jack on the DVD Recorder to the antenna in jack on your TV using the supplied 75-ohm RF cable (R). Scart Connection 1 Plug a scart cable (V) into the scart socket EURO AV1 at the back of the DVD Recorder and the corresponding scart socket at the back of the TV set. 2 Plug a scart cable into the blue scart socket EURO AV2/DECODER at the back of the DVD Recorder and the corresponding scart socket at the back of the Decoder. Connecting a TV Connections This set doesn’t apply the modulator output. However, still apply the RF through Output. Change the video output to “Progressive” in the “Setup” menu to see the progressive video. ANTENNA INPUT Y Pb Pr COMPONENT/PROGRESSIVE VIDEO INPUT S-VIDEO INPUT R C V Rear of DVD Recorder Rear of TV DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 12 mac001 1200DPI 90LPI

Connect the Left and Right AUDIO OUT jacks on the DVD Recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS) 1 Connect the DVD Recorder’s DIGITAL AUDIO OUT jack (COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital coaxial audio cable. 2 You will need to activate the DVD Recorder’s digital output; see ‘AUDIO Settings‘ on page 24. Digital Multi-Channel Sound? A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio/video receiver that supports one or more of the audio formats supported by your DVD Recorder (MPEG audio, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver. Connecting an Amplifier/Receiver • Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. • If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. • 5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with a digital multi-channel decoder. • To see the audio format of the current DVD on the on-screen display, press [AUDIO]. The DVD Recorder does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi-channel surround, you must connect the DVD Recorder to a DTS compatible receiver via one of the DVD Recorder’s digital audio outputs. Connections Amplifier (Receiver) R L AUDIO INPUT DIGITAL INPUT COAXIAL A X Rear of DVD Recorder DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 13 mac001 1200DPI 90LPI

connect the AV1 (Scart 1), AV2 (Scart 2) or Front In jacks on the DVD Recorder to the audio/video out jacks on your external component, using optional audio/video cables. Connecting Optional Equipment Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD recorder and digitally transfer DV tapes or DVD±R/±RW discs to DVD±R/±RW. Use a DV cable (not supplied) to connect the DV In/Out jack of your DV camcorder/video deck to the front panel DV IN jack of the DVD Recorder. Connecting a Digital Camcorder This jack is for connection to DV equipment only. It is not compatible with digital satellite tuner or D-VHS video decks. Front of DVD Recorder Front of DVD Recorder DV IN DV IN/OUT Jack Panel of Accessory Component (VCR, Camcorder, etc.) DV Digital Camcorder DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 14 mac001 1200DPI 90LPI

chapter will show you how to complete the initial installation. 1 ‘Initial Setup Wizard‘ is displayed on the screen. Make sure the RF cable from your antenna or cable TV jack is connected. Press [ENTER] to begin initial installation. 2 'OSD Language' message is displayed on the screen. Select the desired language for the on screen menu using […†]. Press [ENTER] to confirm. 3 'Country Setting' message is displayed on the screen. Select the desired country using […†]. Press [ENTER] to confirm. 4 'Auto Scan' message is displayed on the screen. The DVD Recorder detects channels automatically and stores them in memory. 5 'Adjust channels' message is displayed on the screen. Press [ENTER] to confirm. 6 'Clock Setting' message is displayed on the screen. Set the clock. Use [œ √] to move left/right and use […†] to change the settings. After setting the clock, press [ENTER] to confirm. 7 'Finish' message is displayed on the screen. 'Initial Installation' process is finished. Initial Installation You must follow the initial installation process to set the time, date, channels, and language preferences for the DVD Recorder. Initial Installation Initial Installation Welcome 1/7 Before using the recorder, please finish the Initial Wizard. Next Exit ENTER SETUP Finish 7/7 Finished the Initial Wizard! Please enjoy using the recorder. OSD Language 2/7 Select an OSD language. Prev Next Exit ENTER MENU SETUP French Spanish Portuguese … † † English Country Setting 3/7 Select your current country. Denmark Finland … † † † Australia Belgium Auto Scan 4/7 Auto scan the channels. Channels found :1 1% Adjust Channels 5/7 Move Up Move Down Delete Edit † † No Name 1 - - - - 2 - - - - 3 - - - - † Cancel Clock Setting 6/7 Set the system time. Date : Time: 31 / 08 / 2010 01 : 50 : 42 … † Prev Next Exit ENTER MENU SETUP Prev Next Exit ENTER MENU SETUP Prev Next Exit ENTER MENU SETUP Exit Prev ENTER MENU DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 15 mac001 1200DPI 90LPI

of different countries, follow as below. 1 Press [SETUP] and select the 'Restore Defaults' using [œ √]. Then, RESET the set. (see page 28) 2 Power On, then you see the 'Initial Installation'. 3 Select the country which you want to (on page 26), then repeat the steps 4~10 on page 17~18. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 16 mac001 1200DPI 90LPI

stored all of the channels or when you wish to store a new channel. 1 Press [SETUP]. The Setup menu appears. 2 Use […†] to select ‘Installation ‘. 3 While ‘Installation ‘ is selected, press [√] to select ‘Manual Set‘. 4 Press [ENTER]. The ‘Manual Set’ menu appears. 5 Select ‘Standard‘ using […†]. Use [œ √] to select the desired ‘Standard’ (PAL BG, PAL DK or PAL II), then press [ENTER]. 6 Select ‘Reception‘ using […†]. Use [œ √] to select the desired broadcast system (Aerial or Cable), then press [ENTER]. Aerial: If you are using a standard antenna to receive channels. Cable: If you are using basic cable to receive channels. 7 Select ‘Auto Search‘ using […†]. Search the real channel number by pressing [œ √]. 8 Select ‘Fine Tune‘ using […†]. You can adjust the fine tuning by pressing [œ √]. You can search broadcasting of other countries. If the set can not search the channels, please Re-Install. (see page 19.) Installation Confirm Back Exit ENTER MENU SETUP † † † Manual Set Auto Set Clock Setting Adjust Channels Installation > Manual Set Standard PAL-BG Reception Antenna Auto Search 2 Fine Tune 0 Decoder OFF Store Channel PR-1 Program Name - - - - † † Installation > Manual Set Standard PAL-BG Reception Antenna Auto Search 2 Fine Tune 0 Decoder OFF Store Channel PR-1 Program Name - - - - † † Installation > Manual Set Standard PAL-BG Reception Antenna Auto Search 2 Fine Tune 0 Decoder OFF Store Channel PR-1 Program Name - - - - † † Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Installation > Manual Set Standard PAL-BG Reception Antenna Auto Search 2 Fine Tune 0 Decoder OFF Store Channel PR-1 Program Name - - - - † † Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 17 mac001 1200DPI 90LPI

When the program is encoded (and you have a decoder connected to socket EURO AV2), press [œ √] to select ‘On’ and press [ENTER] to confirm. 10 Select ‘Store Channel‘ using […†]. Use [œ √] to select program number to store. 11 Select ‘Program Name‘ using […†]. Press [ENTER] to move to the second level. If your DVD Recorder is showing no station name or is showing a station name incorrectly, you can correct this. Either select the name from the stored list or you create the station name and enter a 4-digit name. Change the letters with the [ENTER], move the next letter with the […†œ √]. Installation > Manual Set Standard PAL-BG Reception Antenna Auto Search 2 Fine Tune 0 Decoder ON Store Channel PR-1 Program Name - - - - † † Confirm Back Exit ENTER MENU SETUP Installation > Manual Set Standard PAL-BG Reception Antenna Auto Search 2 Fine Tune 0 Decoder ON Store Channel PR-1 Program Name † † Confirm Back Exit ENTER MENU SETUP Rename 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s - t Backspace Save Cancel u v w x y z _ Space BBC1 a Page A Page Symbol Prev/Next Clear Input Digits Back Confirm § ∞ CLEAR 0 ~ 9 ENTER MENU Installation > Manual Set Standard PAL-BG Reception Antenna Auto Search 2 Fine Tune 0 Decoder ON Store Channel PR-1 Program Name - - - - † † Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 18 mac001 1200DPI 90LPI

2 Use […†] to select ‘Clock Setting‘. 3 Press [ENTER]. The ‘Clock Setting’ menu appears. 4 Enter the date and time. [œ √] (left/right): Moves the cursor to the previous or next column. […†] (up/down): Changes the setting at the current cursor position. [0~9] (digit key): Changes the setting directly at the current cursor position. 5 Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup menu. Auto Set The DVD Recorder has a frequency synthesized tuner capable of receiving up to 119 channels. These include VHF channels 2-20, 74-80, UHF channels 21- 69 and CATV channels 1-41. Preparation: Connect the DVD Recorder to the desired type of antenna or cable TV system, as shown in ‘Connecting Antenna/Cable‘ on page 11. 1 Follow steps 1-2 as shown under ‘Manual Set’. 2 While ‘Installation‘ is selected, press […†] to select ‘Auto Set‘. 3 Press [ENTER] to begin the channel search. The tuner will automatically search for all available channels in your area and place them in the tuner’s memory. • After Auto Scan is complete, follow the instructions above to make sure that Tuning Band is set correctly. Auto Scan TV Channels found : 00 3% Cancel Installation † † † Manual Set Auto Set Clock Setting Adjust Channels Confirm Back Exit ENTER MENU SETUP Installation † † † Manual Set Auto Set Clock Setting Adjust Channels Installation > Clock Setting Please set the clock. Date : 01 / 12 / 2006 TIme : 04 : 11 : 33 † † Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 19 mac001 1200DPI 90LPI

2 Use […†] to select ‘Adjust Channels‘. 3 Press [ENTER]. The ‘Adjust channels’ menu appears. 4 Use […†] to select the PR number you want to adjust. Then press [ENTER]. 5 Pop up menu will be displayed. Move After tuning TV stations into your DVD Recorder, you may wish to change the order of PR's you have in your set, as your preference. 6 Press […†] to select ‘Move Up‘ or ‘Move Down’. 7 Press [ENTER]. The selected PR will be moved to the new PR number. Edit After tuning TV stations into your DVD Recorder, you may wish to put a name into any channel you want to. 6 Press […†] to select ‘Edit‘ and press [ENTER] to confirm. 7 The keyboard menu will be displayed. Use […†œ √] to select a character or function and press [ENTER]. 8 After the new channel name is complete, select ‘Save’ and press [ENTER] to confirm. The ‘Adjust channels’ menu appears again. Delete After tuning TV stations into your DVD Recorder, you may wish to delete a station. 6 Press […†] to select ‘Delete‘. 7 Press [ENTER] to confirm. Setup Installation † † † Manual Set Auto Set Clock Setting Adjust Channels Installation > Adjust Channels No. Name 01 - - - - 02 - - - - 03 - - - - 04 - - - - 05 - - - - 06 - - - - Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Installation > Adjust Channels No. Name 99 - - - - 01 - - - - 02 - - - - 03 - - - - 04 - - - - 05 - - - - Confirm Back Exit ENTER MENU SETUP Move Up Move Down Edit Delete Installation > Adjust Channels No. Name 99 - - - - 01 - - - - 02 - - - - 03 - - - - 04 - - - - 05 - - - - Confirm Back Exit ENTER MENU SETUP Move Up Move Down Edit Delete Installation > Adjust Channels No. Name 99 - - - - 01 - - - - 02 - - - - 03 - - - - 04 - - - - 05 - - - - Confirm Back Exit ENTER MENU SETUP Move Up Move Down Edit Delete 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s - t Backspace Save Cancel u v w x y z _ Space BBC1 a Page A Page Symbol Prev/Next Clear Input Digits Back Confirm § ∞ CLEAR 0 ~ 9 ENTER MENU DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 20 mac001 1200DPI 90LPI

You can set this interval to 10 min, 15 min or 20 min. To turn off automatic chapter marking, select ‘Off ‘. Follow the same procedure as ‘Recording Quality’. DVD Quality You can set the default DVD recording quality to: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or SEP (Super Extended Play - 8 hrs/disc). 1 Press [SETUP]. The Setup menu appears. 2 Use […†] to select ‘Recording ‘. 3 While ‘Recording ‘ is selected, press [√] to select ‘Recording Quality‘. 4 Press [√] to move to the second level. 5 Use […†] to to select the desired Record Quality (HQ, SP, EP or SEP). 6 Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu. ‘Recording’ Settings Recording Recording † † † † † † † † Recording Quality HQ Chapter Mark √SP EP SEP Recording Quality Off Chapter Mark √10 min 15 min 20 min Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 21 mac001 1200DPI 90LPI

1 Press [SETUP]. The Setup menu appears. 2 Use […†] to select ‘Language ‘. 3 While ‘Language‘ is selected, press […†] to select ‘OSD Language‘. 4 Press [√] to move to the second level. 5 Use […†] to select the desired language. 6 Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu. Menu/Audio/Subtitle Language Select your preferred language for Disc Menus, Audio soundtracks and Subtitles. Follow the same procedure as the OSD Language. ‘Language’ Settings 22 Setup Language † † † † OSD Language Menu Language Audio Language Subtitle Language √English French Spanish Portuguese Italian German Dutch Hungarian Russian Confirm Back Exit ENTER MENU SETUP Language † † † † OSD Language Menu Language Audio Language Subtitle Language √Auto English French Spanish Portuguese Italian German Dutch Hungarian Confirm Back Exit ENTER MENU SETUP Language † † † † OSD Language Menu Language Audio Language Subtitle Language √Auto English French Spanish Portuguese Italian German Dutch Hungarian Confirm Back Exit ENTER MENU SETUP Language † † † † OSD Language Menu Language Audio Language Subtitle Language √Off English French Spanish Portuguese Italian German Dutch Hungarian Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 22 mac001 1200DPI 90LPI

2 Use […†] to select ‘Preference ‘. 3 While ‘Preference ‘ is selected, press [√] to select ‘Video‘. 4 Press [ENTER]. The ‘Video‘ submenu is displayed. TV Aspect Ratio 1 Use […†] to select ‘TV Aspect‘ while the ‘Video‘ submenu is displayed. 2 Press [√] to go to the second level. 3 Use […†] to select the desired TV Aspect. 4 Press [ENTER] to confirm your selection. 5 Press [SETUP] to exit the menu. 4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 4:3 LB : Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 16:9 : Select when a 16:9 wide screen TV is connected. Video Output Progressive Scan Video provides the highest picture quality with reduced flickering. Interlace or Progressive : If you connect the DVD Recorder to a digital television (DTV) or Monitor using the COMPONENT jacks, set Video Output to ‘Interlace’ or ‘Progressive’. RGB : If you connect the DVD Recorder to a analog television using the SCART jacks, set Video Output to ‘RGB’. Follow the same procedure as TV Aspect Ratio to change the Video Output. Caution Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. ‘Preference’ / Video Settings Preference † † † Video Audio Parental Control Change Password Auto Setting Preference > Video Preference > Video † † † TV Aspect Interlace Video Output P-SCAN √RGB † † † † † TV Aspect 4:3 PS Video Output √4:3 LB 16:9 Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP • If you connect the DVD recorder to a television or Monitor using the COMPONENT jacks and the video output setting is RGB, there is no video on the TV screen. • If you connect the DVD recorder to a television or Monitor using the SCART jacks and the video output setting is Interlace or Progressive, the video shown on the TV screen is just interlaced composite video. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 23 mac001 1200DPI 90LPI

2 Use […†] to select ‘Preference ‘. 3 While ‘Preference ‘ is selected, press […†] to select ‘Audio‘. 4 Press [ENTER]. The ‘Audio‘ submenu is displayed. Digital Output 1 Use […†] to select ‘Digital Output‘ while the Audio submenu is displayed. 2 Press [ENTER] to go to the second level. 3 Use […†] to select the desired digital output type. 4 Press [ENTER] to confirm your selection. 5 Press [SETUP] to exit the menu. Bitstream Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby Digital or DTS decoder). PCM Select when connected to a digital amplifier. The DVD Recorder's digital audio signal will be output in the PCM format when you play a DVD recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard. Dynamic Range While watching DVD movies, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest passages). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set 'Dynamic Range' to any mode you want for this effect. Follow the same procedure as ‘Digital Output‘ to set the Dynamic Range. ‘Preference’ / Audio Settings 24 Setup Preference > Audio Preference > Audio Preference † † † Video Audio Parental Control Change Password Auto Setting † † † † Digital Output √Bitstream Dynamic PCM † † † † Digital Output Full Dynamic Middle √Off Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 24 mac001 1200DPI 90LPI

The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. You can set the parental level from ‘8. Adult’ to ‘1. Kid safe’. 1 Press [SETUP]. The Setup menu appears. 2 Use […†] to select ‘Preference ‘. 3 While ‘Preference ‘ is selected, press […†] to select ‘Parental Control‘. 4 Then press [√] to change parental level. 5 Use […†] to select the desired parental level and press [ENTER] to confirm. ‘Adult’ to ‘Kid safe’ : Some discs contain scenes not suitable for children. If you set a rating for the DVD Recorder, all scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. 6 The Password Input dialog will appear. Enter a 4-digit password using the [0-9] buttons. 7 Press [SETUP] to exit the menu. The initial password is ‘0000‘. You must enter this password before you can change the Parental Level. ‘Preference’ / Parental Controls Setup Preference † † † † Video Audio Parental Control Change Password Auto Setting √1 Kid safe 2 G 3 PG 4 PG 13 5 PGR 6 R 7 NC 17 8 Adult Preference † † † Video Audio Parental Control Change Password Auto Setting Password - - - - Enter the password with digit keys. Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP √1 Kid safe 2 G 3 PG 4 PG 13 5 PGR 6 R 7 NC 17 8 Adult Preference † † † Video Audio Parental Control Change Password Auto Setting Confirm Back Exit ENTER MENU SETUP 1 Kid safe 2 G 3 PG 4 PG 13 5 PGR 6 R 7 NC 17 √8 Adult DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 25 mac001 1200DPI 90LPI

Password‘. 2 Press [ENTER], then ‘Input Password’ submenu appears. 3 Enter your current 4-digit password. 4 Enter a new 4-digit password. Re-enter the new password. 26 • Master Password : If you forget your password, press 3,3,0,8 on the remote control and then press [ENTER]. • Set the new password to something other than '0000'. Setup Preference † † † Video Audio Parental Control 8 Adult Change Password Auto Setting Preference > Change Password Old Password * * * * New Password * * * * Confirm New Password * * - - Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 26 mac001 1200DPI 90LPI

2 Use […†] to select ‘Preference ‘. 3 While ‘Preference ‘ is selected, press […†] to select ‘Auto Setting‘. 4 Press [ENTER]. The ‘Auto Setting‘ submenu is displayed. Auto Clock Setting Auto Clock enables the DVD Recorder to set the clock automatically whenever it is in Standby mode (plugged in but powered off). Auto Clock is only available for models with the VPS/PDC function. Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will automatically use this time and date during the initial setting up procedure during normal use, and every time you switch the video off at the mains. If you find that this time and date is incorrect you can remove this feature by following the steps below changing it to the OFF mode, you will then have to manually set the time and date, see above. 1 Use […†] to select 'Auto Clock Setting' and press [√]. 2 Use […†] to change the 'Auto Clock Setting' status, and press [ENTER] to confirm. VPS/PDC VPS/PDC is a service provided by some stations to enable you to perform timer recordings precisely even if the broadcaster delays the start time of the programme slightly. The time you enter is the VPS/PDC time so this must be correct. Not all stations offer VPS/PDC, in which case the player will start at the time you enter and not the actual start time of the programme. If you wish to start recording at a specific time without it being adjusted by the VPS/PDC system in the event of a delay, switch VPS/PDC off otherwise the recorder will not record at the time. Follow the same procedure as ‘Auto Clock Setting’ to set the ‘VPS/PDC’ status. Auto Setting Setup • "VPS/PDC" and "Auto Clock Setting" are not provided for some countries. Preference † † † Video Audio Parental Control Change Password Auto Setting Preference > Auto Setting † † † † Auto Clock Setting √On VPS/PDC Off Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Preference > Auto Setting † † † † Auto Clock Setting On VPS/PDC √Off Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 27 mac001 1200DPI 90LPI

• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the country, language, channel, and clock settings again. If you wish, you can reset the DVD Recorder to its original factory settings. 1 While ‘System ‘ is selected, press […†] to select ‘Restore Default‘. 2 Press [ENTER]. 3 Use [œ √] to select ‘OK‘ and press [ENTER]. ‘System’ / System Info ‘System Info’ helps service personnel identify key firmware information about your DVD Recorder in case service is required. 1 Press [SETUP]. The Setup menu appears. 2 Use […†] to select ‘System ‘. 3 Press [√]. The ‘System‘ submenu is displayed. ‘System’ / DivX(R) VOD DRM We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. ‘System’ / Restore Defaults Setup System > DivX(R) VOD DRM DivX (R) Video On Demand Your registration code is : MRRRZQZT To learn more visit www.divx.com/vod System > System Info Version FD300007TCU-070716 Loader Version BH07T A100 Micom Software 02.09 System † † † System Info DivX (R) VOD DRM Restore Default System † † † System Info DivX (R) VOD DRM Restore Default Restore Default Do you want to Restore Default? OK Cancel Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP Confirm Back Exit ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 28 mac001 1200DPI 90LPI

setup menu. The DVD±RW Disc function allows you to format, finalize or protect your disc. You can also make it compatible with most other DVD players using “Make Compatible” or “Finalize” for DVD+RW or DVD±R/DVD-RW respectively. 1 Press [SETUP]. The Setup menu appears. 2 Use […†] to select ‘Disc ‘. Press [√] to go to the disc operation sub menu. Format the disc (DVD±RW) 3 Use […†] to select the ‘Format’ menu. 4 If you want to format the disc, press [ENTER]. 5 To confirm, select ‘OK‘. To cancel, select ‘Cancel‘. If you select ‘OK‘ and press [ENTER], all the contents of the disc will be lost. Make Compatible (DVD+RW) 'Make Compatible' for a DVD+RW will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing [MENU] or [TITLE] in other players or any computer equipment with a DVD loader. 3 Press […†] to select ‘Make Compatible‘. 4 If you want to make the disc compatible, press [ENTER]. 5 To confirm, select ‘OK‘. To cancel, select ‘Cancel‘. If you select ‘OK‘ and press [ENTER], your disc will be make compatible. Disc Operation Disc Operation Disc Operation • If you load a blank DVD±R (±RW) disc, it will be initialized (formatted to enable recording). • Do not start recording until disc initialization is complete. • If you load a DVD±R (±RW) that has already been used you can record a program immediately. Disc Initialize • ‘Make Compatible’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and the number of titles on the disc. • If you do not make your DVD+RW disc compatible, your edits will not be recognized by other DVD players. Disc † † † Format Make Compatible Protect Disc Label Disc Info Format Would you like to format this disc? OK Cancel Confirm Back Exit ENTER MENU SETUP Disc † † † Format Make Compatible Protect Disc Label Disc Info Confirm Back Exit ENTER MENU SETUP Disc Format Make Compatible Protect Disc Label Disc Info Confirm Back Exit ENTER MENU SETUP Compatible Would you like to make this disc compatible? OK Cancel SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 29 mac001 1200DPI 90LPI

Finalizing a DVD±R, DVD-RW ‘locks’ its recordings in place so the disc can be played on most standard DVD players or computers equipped with DVD- ROM drives. 3 Use […†] to select ‘Finalize’ menu. 4 If you want to finalize the whole disc, press [ENTER]. 5 To confirm, select ‘OK‘. To cancel, select ‘Cancel‘. If you select ‘OK‘ and press [ENTER], the disc will be finalized. • Once you have finalized a DVD±R, DVD-RW disc, you cannot edit or record anything else on that disc. • It may take over 7 minutes for finalizing the edited disk, you'd better wait till the set finish the finalizing operation. • ‘Finalize’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and the number of titles on the disc. • If the loaded disc is DVD+RW, the “Make Compatible” is displayed instead. When the loaded disc is protected, the “Unprotect” item is displayed instead. You can also unprotect the disc. Protect Disc (DVD±R, DVD±RW) If you want to protect a disc from accidental recording, editing, or erasing, you can lock the disc. Later, if you change your mind, you can unprotect the disc. 3 Use […†] to select ‘Protect’ menu. 4 If you want to protect the whole disc, press [ENTER]. 5 To confirm, select ‘OK‘. To cancel, select ‘Cancel‘. If you select ‘OK‘ and press [ENTER], all the contents of the disc will be protected. Disc Operation Disc † † † Format Finalize Protect Disc Label Disc Info Confirm Back Exit ENTER MENU SETUP Finalize/Unfinalize Would you like to finalize this disc? OK Cancel Disc † † † Format Finalize Protect Disc Label Disc Info Confirm Back Exit ENTER MENU SETUP Protect/Unprotect Would you like to protect this disc? OK Cancel DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 30 mac001 1200DPI 90LPI

with DVD-ROM drive. This Label can be changed using “Disc Label”. 3 Use […†] to select ‘Disc Label’ menu. 4 If you want to change the label, press [ENTER]. 5 The Keyboard Menu will be displayed. Use [œ √…†] to select a character or function and press [ENTER] to confirm. 6 After a new disc label name is complete, select ‘Save’ and press [ENTER]. Disc † † † Format Finalize Protect Disc Label Disc Info Confirm Back Exit ENTER MENU SETUP Disc Label 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s - t Backspace Save Cancel u v w x y z _ Space aaa a Page A Page Symbol Prev/Next Clear Input Digits Back Confirm § ∞ CLEAR 0 ~ 9 ENTER MENU Disc Operation Disc Information 3 Press […†] to select ‘Disc Info’. 4 The Disc Info Menu shows you disc information, such as number of recordings, total titles, free space, etc. Disc † † † Format Finalize Protect Disc Label Disc Info Confirm Back Exit ENTER MENU SETUP Disc > Disc Info Disc Label aaa Title No. 4 Media DVD+RW MID Code RITEKW04 Status Recordable (PAL) Space 2595/4418MB Remainder SP : 48 minutes Confirm Back Exit ENTER MENU SETUP SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 31 mac001 1200DPI 90LPI

At first, go to Title Edit mode. 1 Load any of DVD±R, DVD±RW disc. 2 Press [MENU] or [PLAY] to call the title menu. 3 Use [œ √…†] to select a title to edit and press [EDIT]. Erase a Title 4 Select ‘Erase‘ using […†]. 5 Press [ENTER] to erase the title. 6 Select 'OK' and press [ENTER] to confirm. 7 The Erase Title progress bar will be displayed. This may takes a few minutes. 8 After erasing is complete, the erased title remains as an empty title. Rename a Title To change the name of a title: 4 Select ‘Rename’ using […†] . 5 Press [ENTER] to change the title name. 6 The Keyboard Menu will be displayed. Use [œ √…†] to select a character or function and press [ENTER] to confirm. 7 After the new title name is complete, select ‘Save’ and press [ENTER]. Edit Menu • You can erase titles on DVD±RW discs only. • You can erase all titles in the disc using “Erase All” function. • You can erase a specific place in the disc using “A- B Erase”. You can set the “A” position and “B” position to erase. Title Edit Title Edit Title List Confirm Edit Back Exit ENTER ENTER MENU SETUP Title List Confirm Edit Back Exit ENTER ENTER MENU SETUP Erase Erase All A- B Erase Rename Protect Title List Confirm Edit Back Exit ENTER ENTER MENU SETUP A- B Erase Confirm Back Exit Search Skip Pause ENTER MENU SETUP PREV/NEXT PAUSE REW/FF Erase Erase All A- B Erase Rename Protect Rename Title 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s - t Backspace Save Cancel u v w x y z _ Space PR01 Title1 a Page A Page Symbol Prev/Next Clear Input Digits Back Confirm § ∞ CLEAR 0 ~ 9 ENTER MENU Erase Do you want to erase this title? OK Cancel Set A Set B OK Cancel DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 32 mac001 1200DPI 90LPI

you can lock the title. Later, if you change your mind, you can unprotect the title. 4 Select ‘Protect’ using [œ √…†] . 5 Press [ENTER] to protect the title. 6 Select 'OK' and press [ENTER] to confirm. 7 The Protect Title progress bar will be displayed. This may takes a few minutes. Protect icon ‘ ’ will appear in front of Title name. Title List Confirm Edit Back Exit ENTER ENTER MENU SETUP Erase Erase All A- B Erase Rename Protect SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 33 mac001 1200DPI 90LPI

disc. To access the On-Screen Display (or OSD), press the [DISPLAY] button. During disc playback, press [DISPLAY] to show information about the current disc. Displaying DVD Information On-Screen Display Overview On-Screen Display Overview Title : Shows the current title number and total number of titles, and skips to the desired title number. Chapter : Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Time Elapsed : Shows the elapsed playing time, and skips to the desired time. Audio : Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting; AC3 5.1 CH English or AC3 2 CH English Subtitle : Shows the current subtitle language, and changes the setting Repeat : Shows the current repeat mode, and changes the setting; Chapter, Title, All or Off A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off 1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. 2 Use […†] to select the desired icon on the on-screen display. 3 Use [œ √] to change the numbers. Press [ENTER] to confirm. • Displaying icons on DVD disc Changing menu options in display menu DVD-Video † † † 02/02 00/61 00:35:04 Stereo Off Off A-B Off Track : Shows the current track number and total number of tracks, and skips to the desired track number. Time Elapsed : Shows the elapsed playing time, and skips to the desired time. Audio Effect : Shows the current audio effect, and changes the setting; Stereo or Mix-Mono Repeat : Shows the current repeat mode, and changes the setting; Chapter, Track, All or Off A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off • Displaying icons on VCD/SVCD disc SVCD † † † 01/01 00:35:04 CII1(01/ Off A-B Off In case when PBC is ON, Time Elapsed and Repeat is desactivated. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 34 mac001 1200DPI 90LPI

You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below. • STEREO Audio Signal : Stereo ¨ Mono ¨ Stereo • MONO Audio Signal : Mono • BIL Audio Signal : BIL1 ¨ BIL2 ¨ BIL1 The current audio channel is displayed on-screen. • If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono. • When an external input is selected, the audio channel can be switched only to Stereo. Changing the TV Audio Channel Changing TV Channels If no disc is playing, you can change TV channels using the [0-9] or [PR+/-] buttons on the remote control or [PR+/–] buttons on the front panel. While watching TV, press [DISPLAY] to display/remove the on-screen display. If no DVD disc is inserted, you would see a screen like the following: If any DVD disc is inserted, the disc information is displayed at the second button press. If you press [DISPLAY] again then the TV information is displayed. Displaying TV Information PR 01 : 12 12:30 MONO SP PLAYBACK DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 35 mac001 1200DPI 90LPI

played automatically but the current TV channel displays on the screen. 1 If you want to play a title on the DVD+R (+RW, -R, -RW), you must press [MENU] or [PLAY] to display the title menu of a thumbnail index for each recorded title on the disc. The index picture screen of the title will be displayed. Also title information (name of recording, recorded day, time, recording quality) will be displayed. 2 Select a title to play using […†œ √] then press [ENTER] or [PLAY]. Playing a DVD+R (+RW, -R, -RW) If a title menu is displayed • A title menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter you want to view, then press [PLAY] or [ENTER] to start playback. Press [MENU] to return to the title menu. If a DVD disc which has NTSC TV system is played, the movie may not be smooth because of transformation to PAL TV system. • If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 25. • The DVD Recorder will not play discs with Region codes different from the DVD Recorder. The Region code for this DVD Recorder is 2 (two). • Unless stated otherwise, all operations described below use the remote control. Some features may also be available in the Setup menu. • A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized. • A disc which is recorded with unauthorized movie material may not be played. • A disc which is recorded by other recorder or not recorded correctly may not be recognized or played. • Playback is guaranteed for finalized DVD discs (Make Compatible in the case of DVD+RW). 1 Press [OPEN/CLOSE] to open the disc tray. 2 Load your disc in the tray with the playback side down (label side up). 3 Press [OPEN/CLOSE] to close the tray. 4 ‘LOAD’ appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY]. In some cases, the Disc menu might appear instead. Playing a DVD/VCD Title List Confirm Edit Back Exit ENTER ENTER MENU SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 36 mac001 1200DPI 90LPI

1 Press [PLAY/PAUSE] during playback. The DVD Recorder will go into Pause mode. 2 You can back up or advance the picture frame-by-frame by pressing [NEXT] repeatedly during Pause mode. Fast Forward/Backward 1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder will go into Search mode. 2 Press [REW] or [FF] to select the desired speed: √√x2, √√x4, √√x8, √√x16, √√x32, √√x64, √ (forward) or œ, œœ x2, œœ x4, œœ x8, œœ x16, œœ x32, œœ x64 (backward). Slow Motion Press [SLOW+] or [SLOW–] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] repeatedly, the speed will be set to 1/4, 1/8, 1/16 speed. Zoom The Zoom function allows you to magnify the video image and scroll around the enlarged image. 1 Press [ZOOM] during Play mode to activate the Zoom function. Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) ¨ X2 ¨ X3 ¨ X4 ¨ X1/2 ¨ X1/3 ¨ X1/4 ¨ X1 (normal size) 2 Use the [œ √…†] buttons to scroll around the zoomed picture. 3 To resume normal playback, press [ZOOM] repeatedly until the X1 (normal picture) appears. The Zoom function may not work on some DVDs. The Camera Angle icon is displayed on the TV screen when alternate angles are available. Pressing [SLOW-] will set the playback mode as reverse with speed to 1/4, 1/8, 1/16 . Changing the Audio Language (DVD) Press [AUDIO] and then press [AUDIO] repeatedly during playback to hear a different audio language or audio track. Subtitles (DVD) Press [SUBTITLE] and then press [SUBTITLE] repeatedly during playback to select among all available subtitle languages. Camera Angle (DVD) If a DVD contains scenes recorded at different camera angles, angle icon displays automatically. You can select among these angles during playback. Press [ANGLE] and then press it repeatedly during playback to select the desired angle. The number of the current angle appears on the TV screen. PLAYBACK DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 37 mac001 1200DPI 90LPI

1 Press [PLAY/PAUSE] play to the start of the desired scene. 2 Press [A-B] to mark the start point. 3 Use [FF], [NEXT] to search the end point. 4 Press [A-B] to mark the end point. 5 The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] button again. Repeat 1 To repeat the currently playing chapter, press [REPEAT] a second time. ‘Chapter’ appears on the TV screen. 2 To repeat the currently playing title, press [REPEAT] a third time. ‘Title’ appears on the TV screen. 3 To repeat the whole disc, press [REPEAT] a fourth time. ‘All’ appears on the TV screen. Selecting Titles When a disc has more than one title, you can select among all available titles as follows: 1 Press [DISPLAY] and use […†] to select the Title icon. Use [œ √] or [0~9] to select the desired title number and press [ENTER] to confirm. Selecting Chapters When a title on a disc has more than one chapter, you can select among all available chapters as follows: 1 Press [PREV (§)] or [NEXT (∞)] briefly during playback to select the next or previous chapter. 2 To skip directly to any chapter during playback, press [DISPLAY] and use […†] to select the Chapter icon. Use [œ √] or [0~9] to select the desired chapter number and press [ENTER] to confirm. DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 38 mac001 1200DPI 90LPI

Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your desired selection and press [ENTER]. 1 Press [MENU]. The Disc menu is displayed. 2 To exit the Disc menu, press [STOP]. Title Menus 1 Press [TITLE]. If the current title has a menu, the Title menu will appear on the TV screen. Otherwise, the Disc menu may appear. 2 The Title menu may contain camera angles, spoken languages and subtitle options, as well as the chapters for the title. DVD Playback After recording some titles to a recordable disc without finalizing, there is only title menu in the disc. In this case, with [MENU] key you can call title menu. PLAYBACK DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 39 mac001 1200DPI 90LPI

Other Disc Playback The DVD Recorder can play DivX files in a disc. 1 Insert the DivX disc and close the tray. The Media Menu appears on the TV screen after a few moments to load the disc. 2 Use […†] to select ‘DivX’, then press [ENTER]. 3 Use […†] to select a file, then press [ENTER]. 4 Use [√] to get into sub folder and use [œ] to exit to parental folder. 5 Press [FF] or [REW] during playback. The DVD Recorder will go into Search mode. Press [FF] or [REW] to select the desired speed: √√X8, √√X16, √√X32, √PLAY(forward) or œœ X8, œœX16, œœX32, œ PLAY(backward) 6 Use [PLAY/PAUSE] to pause playback while the disc is playing. 7 To stop playback at any time, press [STOP]. DivX Playback • DivX® is a high-quality video compression format for creating, editing, and distributing multimedia content. More than just a video technology, DivX is a global phenomenon that has become the new standard for digital video. Dubbed the “MP3 of video” for its remarkable compression and widespread popularity, DivX video enables anyone, anywhere to create and enjoy DVD-quality digital video. • Playable MPEG 4 SP and ASP is DivX5.1, DivX5.05, DivX5.02, DivX4.1.2, DivX3.11, and Dr. DivX1.0.2. • ASP does not support MPEG 1, MS MPEG 4, GMC and Qpel (Quarter Pixel). • Playable biterates is to max. 8MBPS. • Playable frame number of screens per a second is 30, 25, 23.97, 20, 15, 12,10 and 8. • Playable resolution is max. 720X576. • Playable audio stream formats are MPEG 1 Layer I, Layer II and Layer III. • It may not be played according to a type of DivX files, a recording method, or a disc state. (The device was authenticated for DivX files from the DivX Networks, Inc. and it is available for playing a normal DivX but may be unavailable for playing the DivX files that have been manufactured with an illegal or abnormal Codec.) • DivX,DivX certified and associated logos are trademarks of DivX Networks, Inc. and are used under license. Disc Media Item : 1/1 ENTER/PLAY PREV/NEXT /DivX Off DivX Move Page Play Exit SETUP Disc Media Item : 1/2 ENTER/PLAY PREV/NEXT /DivX/21gram Off Codec: CODEC_XVID Resolution: 704x368 Frame Rate: 23.976fps Audio Sample Rate : 48KHz Audio bit per sample: Other Move Page Play Exit SETUP 21Grams (2003)... 21Grams (2003)... DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 40 mac001 1200DPI 90LPI

screen after a few moments to load the disc. 2 Use […†] to select ‘Audio’, then press [ENTER]. 3 Use […†] to select a track or a file, then press [PLAY] or [ENTER]. During playback, the current track's elapsed playing time will appear on the menu. Playback will stop at the end of the disc. 4 While playing an Audio CD, use [FF] or [REW] for 2X, 4X, 8X, 16X speed playback. 5 Use [PLAY/PAUSE] to pause playback while the disc is playing. 6 To stop playback at any time, press [STOP]. 41 The DVD Recorder can play audio CDs and MP3 files. Audio CD/MP3 Playback Repeat of Audio CD and MP3 • Audio CD : Press [REPEAT] to repeat a track (file) and press again to repeat the whole disc. • MP3 : Press [REPEAT] to repeat one file, all the files in a folder or whole disc. • On the MP3 disc menu, you can display the folders on the disc. • Use […†] to select the folder icon on the MP3 disc menu then press [√] to get into sub folder and use [œ] to exit to parental folder. • You can also display just the tracks in the folders. • The audio CD is played automatically after loading. Other Disc Playback PLAYBACK Disc Media Item : 1/41 ENTER/PLAY PREV/NEXT /Audio/__1~3_ Off Play time: _ _ _ Bitrates: 128kbps Album: _ _ _ Singer : _ _ _ File sizes: 3.65MB 02;18 Move Page Play Exit SETUP DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 41 mac001 1200DPI 90LPI

6 Press [NEXT] or [PREV] to manually skip to the next or previous image. 7 Press [√] (or [œ]) to rotate the image (counter) clockwise. 8 Press [STOP] to exit the slideshow. • The DVD Recorder can playback up to 1000 files per disc. • Press [DISPLAY] to remove or show the guide bar. The DVD Recorder can display JPEG files. 1 Insert your disc and close the tray. The Media Menu appears on the TV screen after a few moments to load the disc. 2 Use […†] to select ‘Picture’, then press [ENTER]. The JPEG disc folder tree appears. 3 If there are folders which contain JPEG files, select the desired folder using […†œ √] and press [ENTER]. 4 Select the thumbnail you want to display using […†] and press [ENTER]. 5 The full size image will be displayed and a slide show starts automatically with a time interval of 5 seconds. JPEG CD Playback Disc Media Item : 1/200 ENTER/PLAY PREV/NEXT /Picture/4Mega Off File Information: File size: 1.20MB Resolution: 2272x1704 Colors : 32bits Move Page Play Exit SETUP IMG_0044.JPG IMG_0045.JPG IMG_0046.JPG IMG_0047.JPG IMG_0048.JPG IMG_0049.JPG IMG_0050.JPG IMG_0051.JPG IMG_0052.JPG Zoom Exit ZOOM MENU Zoom Continue ZOOM PLAY DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 42 mac001 1200DPI 90LPI

1 Turn on the DVD Recorder and load a recordable disc. Make sure your TV input is set to view the DVD Recorder. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly. HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP (Super Extended Play - 8 hrs/disc). 3 If your DVD Recorder does not show a TV program, press [INPUT] on the remote control. Use [PR +/–] to select the TV channel you wish to record. 4 Press [AUDIO] to select the audio channel to record (Stereo, BIL, or Mono). The table below shows what audio channel will be recorded with different settings and different types of broadcasts. The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV broadcast is in Stereo, then setting the DVD Recorder to Stereo will record the broadcast in Stereo, and the Monitor Audio will also be in Stereo. 5 Press [G REC] once. Recording will start. The REC indicator lights on the front panel display. Recording continues until you press [STOP] or the disc is full. To record for a fixed length of time, see One Touch Record on the next page. 6 Press [I STOP] to stop recording. Recording from TV Basic Recording Basic Recording • The maximum number of DVD titles per disc is 49. If the DVD Recorder is powered off during DVD recording, the recording will not be saved. • If a DVD+RW or unfinalized DVD+R (-R, -RW) disc is inserted in the tray, no title is played automatically after loading is finished. • If you are recording to a blank DVD+R (+RW, -R, -RW) disc, it may take up to 5 minutes for initial processing after disc loading. Broadcast Audio Monitor L Ch R Ch Audio MONO MONO MONO MONO MONO STEREO L R STEREO MONO MONO MONO MONO BIL I BIL I BIL I BIL I BIL II BIL II BIL II BIL II TV Broadcast STEREO BIL Selected Audio PLAYBACK RECORDING DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 43 mac001 1200DPI 90LPI

Checking the Recording Time 1 Press [PLAY/PAUSE] to pause the disc during recording. 2 When you want to continue recording, press [PLAY/PAUSE] or [G REC]. To Pause the Recording Basic Recording Note • To quit One Touch Recording, press [STOP]. • The DVD Recorder will automatically power off when One Touch Recording ends. One Touch Recording allows you add recording time in fixed increments at the touch of a button. 1 Follow steps 1-4 under Recording from TV. 2 Press [G REC] repeatedly to set the length of the recording. Recording starts after the first press. Each subsequent press increases the recording time by 30 minutes within the available space. The remaining time is displayed on the front panel display. One Touch Record (OTR) DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 44 mac001 1200DPI 90LPI

1 Insert recordable media such as DVD±R ,DVD±RW. 2 Press [TIMER]. The ‘Timer Recording’ menu appears. 3 Select ‘Timer Recording’ with […†] and confirm with [ENTER]. 4 Enter the necessary informations for your Timer Recording after pressing [ENTER]. • Date/Year – Choose a date up to 1 month in advance, or select a daily or weekly program. • Start – Set the recording start time. • Stop – Set the recording end time. • Source – Choose the desired channel, or one of the external inputs from which to record. • Quality – Choose a Record mode. HQ, SP, EP or SEP • Repeat – Choose frequency of the recording. Once, Daily, Weekly, Mon- Fri. [œ √] – Moves the cursor left/right. […†] – Changes the setting at the current cursor position. Press [ENTER] after filling in all the program information. 5 Press [ENTER] to save the program. The Timer Record List will appear. 6 Press [SETUP] or [TIMER] to exit the Timer Record List. 7 Timer indicator will light or blinking. Power Off the DVD Recorder to start the Timer Recording. If you did not set the clock on the DVD Recorder, you must do so before programming a timer recording. Timer Recording Timer Recording Timer Recording using Manual Set Record Screen Timer Recording Move Confirm Exit … † ENTER TIMER † Timer Recording Showview Timer Recording List 1/1 28/11/2010 13:09:33 Edit Back Exit ENTER MENU TIMER Date Year Start Stop Source Quality Repeat Result - -/- - -- - -:- - - -:- - - - - - - - Timer Recording List 1/1 28/11/2010 13:09:33 Confirm Back Exit ENTER MENU TIMER Date Year Start Stop Source Quality Repeat Result 01/01 07 08:42 09:42 PR00 SP Once Timer Recording List 1/1 28/11/2010 13:09:33 Confirm Back Exit ENTER MENU TIMER Date Year Start Stop Source Quality Repeat Result 01/01 07 08:42 09:42 PR00 SP Once - -/- - -- - -:- - - -:- - - - - - - - Edit Delete Disable Cancel RECORDING DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 45 mac001 1200DPI 90LPI

• The DVD Recorder will record the audio according to the current TV tuner setting (Stereo, Mono or BIL). Use the [AUDIO] button to set the audio before switching the DVD Recorder to Standby mode. • The DVD Recorder will automatically power off when the Timer Recording ends. • There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded. Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and end time. All the informations needed by the DVD recorder for programming are contained in the ShowVIew programming number. This ShowVIew number is found in most TV listings. 1 Insert recordable media such as DVD±R ,DVD±RW. 2 Press [TIMER]. The ‘Timer Recording’ menu appears. 3 Select ‘ShowVIew’ with […†] and confirm with [ENTER]. The ‘ShowVIew’ menu appears. Enter the entire ‘ShowVIew’ number. This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings magazine. e.g.: 5-234-89 or 5 234 89 Enter 523489 for the ‘ShowVIew’ number. 4 Press [ENTER] to confirm. 5 The decoded information appears after confirmation. You can go back at any time to change the information by pressing [ENTER]. Select the appropriate input field using [œ√]. If required, change the information using […†]. If all the informations are correct, press the [ENTER] button. The programming informations are stored in a TIMER block. 6 Press [SETUP] or [TIMER] to exit the Timer Record List. 7 Timer indicator will light or blinking. Power Off the DVD Recorder to start the Timer Recording. Timer Recording using ShowVIew system ShowVIew is not available for some countries. Timer Recording † † Quality Repeat SP Once ShowView No. 523_ _ _ _ _ _ Timer Recording Move Confirm Exit … † ENTER TIMER Move Confirm Exit œ√ ENTER TIMER † † Timer Recording Showview Timer Recording List 1/1 28/11/2010 13:09:33 Confirm Back Exit ENTER MENU TIMER Date Year Start Stop Source Quality Repeat Result 01/01 07 08:42 09:42 PR00 SP Once DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 46 mac001 1200DPI 90LPI

• No disc is loaded. • A non-recordable disc is loaded. • Disc is protected in the ‘Disc Operation’ menu; see page 30. • There are already 49 titles recorded on the disc. You cannot enter a Timer Recording if: • A recording is already under way. • 32 Timer Recordings have already been set. If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘. Timer Recording Troubleshooting You can clear a Timer Recording any time before the recording actually starts. 1 Use […†] to select the program you want to erase on the Timer Recorder List. 2 Press [ENTER]. 3 Select ‘Delete’ and confirm it by pressing [ENTER]. Canceling a Timer Recording After a Timer Recording has started, you can still cancel the program by pressing [I STOP]. Stopping a Timer Recording in Progress Timer Recording Timer Recording List 1/1 28/11/2010 13:09:33 Confirm Back Exit ENTER MENU TIMER Date Year Start Stop Source Quality Repeat Result 01/01 07 08:42 09:42 PR00 SP Once - -/- - -- - -:- - - -:- - - - - - - - Edit Delete Disable Cancel RECORDING DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 47 mac001 1200DPI 90LPI

Recorder’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder; see pages 11 and 14. 2 Use [PR+/–] or [INPUT] to select the external input to record from. • Tuner : Built-in tuner • F-AV : Audio/Video on front panel • AV1, AV2 : Audio/Video Input on back panel • DV : DV input on front panel. 3 Load a recordable disc. 4 Set the desired Recording mode by pressing [REC MODE] repeatedly. HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP (Super Extended Play - 8 hrs/disc). 5 Press [G REC] once. Recording will start. The REC indicator lights on the front panel display. Recording continues until you press [STOP] or the disc is full. To record for a fixed length of time, see ‘One Touch Record‘ on page 44. 6 Press [I STOP] to stop recording. Recording from External Components Note • If your source is copy-protected, you will not be able to record it using the DVD Recorder. See ‘Copyright Notice‘ on page 4 for more details. • If your source has NTSC TV system, the video may not be smooth because of transformation to PAL TV system. Recording from an External Input Recording from an External Input DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 48 mac001 1200DPI 90LPI

Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder using a single DV cable for input and output of audio, video, data and control signals. The i.LINK interface is also known as IEEE 1394-1995. “i.LINK” and the “i.LINK” logo are trademarks. • The DVD Recorder is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuner and Digital VHS video recorders are not compatible. • You cannot connect more than one DV camcorder at a time to the DVD Recorder. • You cannot control the DVD Recorder from external equipment connected via the DV IN jack (including two DVD Recorders). • It may not always be possible to control the connected camcorder via the DV IN jack. • Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz). • Picture disturbance on the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or if the DV cable becomes disconnected. What is DV? You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD Recorder. You can use the DVD Recorder remote to control both the camcorder and the DVD Recorder. Before recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14. 1 Make sure your digital camcorder is connected to the front panel DV IN jack; see page 14. 2 Use [PR+/–] or [INPUT] to select the DV input. DV appears on the front panel display and the TV screen. 3 Find the place on the camcorder tape from which you want to start recording. For best results, pause playback at the point you want to start recording. Depending on your camcorder, you can use the DVD Recorder remote to control the camcorder using the STOP, PLAY, PAUSE, FF and REW functions. 4 Press [G REC] once to start recording. Recording is automatically paused if the DVD Recorder detects no signal. You can pause or stop the recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control during recording. Recording from a Digital Camcorder The source signal must be DVC SD format. Some camcorders cannot be controlled using the DVD Recorder remote. If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one. You cannot control the DVD Recorder remotely from a component connected to the DV IN jack. You cannot record date and time information from a DV cassette. RECORDING DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 49 mac001 1200DPI 90LPI

No power. No picture. No sound. Playback picture is poor. DVD Recorder does not start playback. Picture from external input is distorted. Some channels are skipped over when using [PR+/–]. Picture or sound of broadcasting channel is weak or missing. Camcorder image not shown. Camcorder image via A/V input or DV to DVD Recorder is not shown on TV screen. The power cord is disconnected. The TV is not set to receive DVD Recorder signal output. The video cable is not connected securely. The TV power is turned off. The equipment connected with the audio cable is not set to receive DVD Recorder signal output. The audio cables are not connected securely. The power on the equipment connected with the audio cable is turned off. The audio cables are damaged. The disc is dirty. No disc is inserted. An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. The Parental Control level is set. The video signal from the external component is copy-protected. The skipped channels were deleted with the ‘Adjust Channels’ menu. Antenna or cables are loose. Wrong Tuning Band is selected in the DVD Recorder Setup menu. Camcorder is off. DVD Recorder’s source is not set to AV1, AV2, AVF, or DV. Plug the power cord into the wall outlet securely. Select the appropriate video input on the TV so the picture from the DVD Recorder appears on the TV screen. Connect the video cable securely. Turn on the TV. Select the correct input mode on the audio receiver so you can listen to the sound from the DVD Recorder. Connect the audio cables securely. Turn on the equipment connected with the audio cable. Replace with new ones. Clean the disc. Insert a disc. (Check that the disc indicator on the front panel display is lit.) Insert a playable disc. (Check the disc type, color system, and regional code.) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Cancel the Parental Control function or change the rating level. You cannot connect via the DVD Recorder. Connect the component directly to your TV. Use the ‘Auto Set’ menu to restore channels. See ‘Auto Set‘ on page 19. Tighten connections or replace cable. Try all ‘Reception’ and ‘Standard‘ options; see page 17 for details. Turn camcorder on and operate properly. Use [INPUT] to select AV input channel (AV1, AV2, AVF, or DV). Symptom Cause Solution Troubleshooting Troubleshooting DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 50 mac001 1200DPI 90LPI

on this DVD Recorder on another DVD player. Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. The disc was not finalized (or not made compatible if using a DVD+RW). Some players will not play even a finalized disc. Discs recorded with copy-once material cannot be played on other players. The remaining blank space on the disc is insufficient. The source you are trying to record is copy-protected. When setting the recording channel, the channel is tuned on your TV’s tuner. Clock in DVD Recorder is not set to correct time. Timer has been programmed incorrectly. TIMER indicator light does not appear after programming timer. TV is not Stereo-compatible. Broadcast program is not in stereo format. DVD Recorder A/V Out jacks are not connected to TV A/V In jacks. DVD Recorder Audio/Video Out is not selected for viewing at the TV. DVD Recorder’s TV audio channel is set to BIL or MONO. The remote control is not pointed at the remote sensor of the DVD Recorder. The remote control is too far from the DVD Recorder. There is an obstacle in the path of the remote control and the DVD Recorder. The batteries in the remote control are dead. Finalise or Make compatible the disc; see page 29~30. No solution. No solution. Use another disc. You cannot record the source. Select the channel on the DVD Recorder’s built-in TV tuner. Total number of recorded title is 49. Set clock to correct time. See ‘Clock Setting’ on page 19. Reprogram Timer. See ‘Timer Recording‘ on page 45~47. Reprogram Timer. No solution. No solution. Make A/V connections. Stereo is available only via A/V output from DVD Recorder. Select AUX or A/V source as TV input. Set TV audio channel mode to Stereo. See ‘Changing the TV Audio Channel‘ on page 35. Point the remote control at the remote sensor of the DVD Recorder. Operate the remote control within 23 ft (7m). Remove the obstacle. Replace the batteries. Symptom Cause Solution REFERENCE DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 51 mac001 1200DPI 90LPI

to a warm place. Under extremely humid conditions. Keep the DVD Recorder plugged into an AC power outlet with the power on. This will help prevent condensation. When condensation has occurred, wait a few hours for the DVD Recorder to dry before using it. Moisture Condensation Troubleshooting Moisture condensation can occur: In locations where moisture condensation may occur: DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 52 mac001 1200DPI 90LPI

Remote control ....................................... 1 Batteries ................................................. 2 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #: 5,451,942 and other U.S. and worldwide patents issued and pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. Design and specifications are subject to change without notice. General Power requirements 100–240V~, 50/60 Hz Power consumption Maximum 23W Dimensions (approx.) 420*50*319 mm (w*h*d) Mass (approx.) Net : 3.27kg, Gross : 4.17kg Operating temperature 5°C to 35°C Operating humidity 5% to 90% Signal system PAL Recording Recording formats DVD Video Recording, DVD-VIDEO Recordable discs DVD+R, DVD+RW, DVD-R, DVD-RW Recordable time Approx 1 Hour (HQ mode), 2 Hours (SP mode), 4 Hours (EP mode), 8 Hours (SEP mode) Video recording format Sampling frequency : 27MHz, Compression format : MPEG 2 Audio recording format Sampling frequency : 48kHz, Compression format : Dolby 2 CH DVD Specifications Laser system Semiconductor laser, wavelength 650 nm Frequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz Signal-to-noise ratio More than 90 dB T Harmonic distortion Less than 0.06% Dynamic range More than 90 dB Inputs ANTENNA IN Antenna or CATV input, 75Ω VIDEO IN 1.0 Vp-p, 75Ω, sync negative, RCA jack x 1, SCART jack x 2 AUDIO IN -8.8 dBm, More than 47k, RCA jack (L, R) x 1, SCART jack (L, R) x 2 DV IN 4 pin (i.LINK/IEEE 1394 standard) Outputs VIDEO OUT 1.0 Vp-p, 75Ω, sync negative, SCART jack x 1 COMPONENT VIDEO OUT (Y) 1.0 Vp-p, 75Ω, negative sync, RCA jack (Y) x 1 (Progressive Scan) (Pb)/(Pr) 0.7 Vp-p, 75Ω, RCA jack (Pb, Pr) x 1 AUDIO OUT Digital audio : (Coaxial) 0.5 Vp-p, 75Ω, RCA jack x 1 Analog audio : 1.1 Vrms (1kHz, -6dB), 600Ω, RCA jack (L, R) x 1 Accessories Technical Specifications Technical Specifications DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM ˘ ` 53 mac001 1200DPI 90LPI