curt R16 5TH Installation Instructions
Text of curt R16 5TH Installation Instructions
Read and understand instructions before using this product.
Fully instruct and demonstrate the operation of this 5th
wheel hitch to the end user. Include the importance of
observing all warnings contained herein, including warning
labels on 5th wheel hitch mid section. Provide this manual
in its entirety to the end-user.
To avoid serious injury, do not expose hands, body parts
or clothing between the truck and trailer or the truck's bed
sides and trailer.
The R16 roller is to be used with 5th wheel trailers weighing
up to 16,000 lbs. Never use on trailers exceeding 16,000 lbs.
CAUTION: The R16 roller will reposition your 5th wheel hitch
12" rearward. However, this will not guarantee complete truck
cab/trailer clearance when towing.
Step 1
Before beginning assembly of the R16 roller, check
the base rails in your truck to be sure they are properly
installed and are parallel with each other. The diagonal
dimen
Base rail hitch pin illustration
Base rail
5TH WHEEL HEAD
INSTALLATION
To install the 16515 5th wheel head (Figure 6), slide the
16515 cross member weldment into the R16 roller as shown.
Select desired height using the adjustment holes in the cross
member weldment. From the inside, insert four supplied
1/2" x 1 3/4" bolts int
Align trailer and tow vehicle in
a straight line, on a level surface.
Pull handle out and rotate counter-clockwise
to place lock bar in the ready-to-lock position.
Set trailer brakes and slowly drive the tow vehicle forward
until R16 roller stops. Locking bars will automatically engage
in the rear locking groove. NOTE: Visually check that lock
bar handle is vertical, both lock bars are fully engaged and
that the green indicator is visible.
OPERATING INSTRU