FE PHW Quick Reference

Text of the manual

– 1 –

Conﬁ rming Speciﬁ cations and Accessories ................... 1 Related Information ........................................................ 1 Please Read First ........................................................... 2 For Proper Usage ........................................................... 5 1. Installation ............................

– 2 –

1. DANGER 1.1 Installation • This equipment is intended to be used under the following conditions. Read this “Caution on Safety” carefully before using the instrument. • Be sure to observe the instructions shown below, because they describe important information on safety. The degree of danger is classified into the following two levels

– 3 –

2. Caution 2.1 Cautions when installing • Never use the instrument if it is found damaged or deformed when unpacked. Otherwise a fire, mal- function, or failure may result. • Check that the instrument is to the proper specifica- tions. Otherwise damage or failure may result. • Do not give a shock to the instrument by falling or topplin

– 4 –

• Install the instrument paying attention to prevent foreign matters such as scraps, electric wire chips, and iron powder from entering in the instrument. Otherwise malfunction or failure my result. • Do not use the wires other than the specified com- pensation conducting wires for the thermocouple input connection. Otherwise improper indica

– 5 –

For Proper Usage

When the display does not make sense. 6 Turn Power On Wiring 2 Usage (Read before using) 3 Display and Operation Methods 4 List of parameters 5 Operation Installation 1 Model Designation Confirmation • Please confirm that the model delivered matches your order. • Dimensions • Panel cutout • How to

– 6 –

Alarm output relay terminal Input terminal Note) For current input, connect optional shunt resistors to the voltage input terminals. (1) (2) Alarm output transistor terminal (4) DI input terminal Ethernet terminal (option) (6) (3) M4 screw Power supply terminal 100 to 240V AC 50/60Hz L N Number of input points = 1 to 9 points Number of input points

– 7 –

Name Function Name Function (1) Display unit (2) Power switch Used to turn the power ON or OFF. (3) Memory card slot (4) Memory card ejection button To remove the memory card from the slot, press this button. (5) Connector to parameter loader (6) Allows the Real time trend screen, Bar Graph Display screen, Analog Meter Display screen, Digital Displ

– 8 –

Data display screens Parameter setting (To real time trend group1) (To parameter setting screen) Parameter setting screen Each parameter screen (Example: Range setting screen) Parameter setting TAG (1) Display color (2) Display range (3) Recording type (4) Recording mode (4) (1) (4) Select using the keys Select using the keys, and