EVS Synapse MGU100 Installation And Operation Manual

4K (MGU100) / 3Gbps (MGG100), HD, SD SDI Eightfold Multiview Building Block (ACP2 model) Version 1.00 | December 2021 INSTALLATION AND OPERATION MANUAL ...

and/or its affiliates (EVS) and are provided “as is” without any expressed or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. In particular, EVS makes no warranty regarding the use or the consequences of use of this manual and the information contained herein. ...

frame (SFR18, SFR08 or SFR04) must be terminated with three-conductor AC mains power cord that includes an earth ground connection. To prevent shock hazard, all three connections must always be used. NEVER use flammable or combustible chemicals for cleaning components. NEVER operate this product if any cover is removed. NEVER wet the inside ...

2 3. Quick Start 3 3.1. Changing Settings and Parameters 3 3.2. Using Cortex with Synapse 5 3.3. Daisy Chain Mode 6 4. The MGU100 / MGG100 Card 9 5. Graphical User Interface 12 5.1. Window Layout Tab 12 5.1.1. Overview 12 5.1.2. Video, Clock and Notes Settings 14 5.2. Control Tab 20 5.3. Background Tab 23 5.4. Detection Tab 24 5.5. Network T ...

37 7. Events Menu 40 8. LED Indication 42 9. Block Schematic 43 10. Connector Panels 44 Appendices 46 Appendix 1: Supported Protocols 46 Appendix 2: Timezones 51 GNU Public License 58 ICONOGRAPHY Note Tip Warning IV | December 2021 | Issue 1.00.B ...

has been added on the left margin to highlight information on updated features. No changes in version 1.00 of the MGU100 - MGG100 require an update to the current manual. INSTALLATION AND OPERATION MANUAL Synapse MGU100 - MGG100 | What's New? | V ...

high-quality processing are key features of this system. Synapse offers a full range of converters and processing modules. Please visit the EVS website at www.evs.com to obtain the latest information on our new products and updates. Local Control Panel The local control panel gives access to all adjustable parameters and provides status in ...

Unpacking The EVS Synapse card must be unpacked in an anti-static environment. Care must be taken NOT to touch components on the card – always handle the card carefully by the edges. The card must be stored and shipped in anti-static packaging. Ensuring that these precautions are followed will prevent premature failure of components mounted on the board. Placing the Card The Synapse card can be placed vertically in an SFR18 fra ...

Powering Up On powering up the Synapse frame, the card set will use basic data and default initialization settings. All LEDs will light up during this process. After initialization, several LEDs will remain lit – the exact number and configuration is dependent upon the number of inputs connected and the status of the inputs. Default Settings In its default state, the MGG100 will act as dual-head, eightfold split. The auto format detection ...

How to Change Parameters Using the Front Panel Control With the display as shown below: Pressing selects the SFS10 in frame slot 01. The display changes to indicate that the SFS10 has been selected. In this example the Settings menu item is indicated. Pressing the selects the menu item shown, in this example Settings. (Pressing or will change to a different menu, e.g. S ...

or . All menu items can be monitored and/or changed in this way. Changing a setting has an immediate effect. Menu Structure Example Slot Module Item Parameter Setting S02 Identity S01 SFS10 Settings Standard dig Auto S00 RRC18 Status Mode 625 Events Ref-Input 525 H-Delay 3.2. Using Cortex with Synapse EVS Cortex Software Cortex can be used to change the settings of Synapse modules from a PC, either locally or rem ...

Daisy chain mode refers to the way several multiviewer cards can be connected to one another, in order to be able to configure a greater number of input streams. Daisy Chain mode is applicable to the MGU, MGG and MNU modules only. How to Connect Cards in Daisy Chain Mode The multiviewer cards have to be connected using the cables provided specifically for this purpose. The illustrations below show how the cables are connected in orde ...

audio cards, such as DIO88 for external AES inputs or DEE28 for Dolby E decoding The output status enables you to check that the bus is connected correctly. For more information, please refer to "Output Status Tab" on page 33. INSTALLATION AND OPERATION MANUAL Synapse MGU100 - MGG100 | 3. Quick Start | 7 ...

daisychained with the SynView loop connectors to create a 128-input 8-output multiviewer on 8 multiviewer heads. 8 | December 2021 | Issue 1.00.B ...

Introduction SynView is EVS’s next generation Synapse modular multiviewer. The feature set has been increased tremendously, with double the amount of inputs and up to 8 times the amount of outputs (heads) UHD/4K/60Hz output resolution on display outputs and a 6-fold increase in processing power. The system consists of 4 basic models. These versions can be mixed and matched to build a hybrid multiviewer with up to several hundr ...

• 8 inputs to two individual panel outputs or 2 SDI (1080p) outputs • Each input can be displayed on each head with individual scale and position • Low latency (20 ms for 50Hz, 17 ms for 59.94Hz) • Full RGB domain (internal 20-bit processing for scaling) • Up to 4K output production multiviewer with 8 PIP (scalers) (MGU200 only) • Up to 2 x 4K/UHD (2160 ...

• Safe area markers • Automatic 4:3 and 16:9 modes through VI or WSS triggers (SD SDI inputs) • GPI control for Aspect ratio, Full screen or quad mode and Tally • Locks to Bi-level, Tri-level syncs or SDI input • Full control and status monitoring through the front panel of the SFR04 / SFR08 / SFR18 frame and the Ethernet port (ACP1). Position of the Inputs on Output Default positions of the inputs ...

5.1. Window Layout Tab 5.1.1. Overview The layout settings enable you to configure the window display on the multiviewer head. Each card can have up to 8 inputs. When multiple cards are daisy-chained, it is possible to have very large numbers of inputs. Each MGU100-MGG100 card has 8 scalers. Window selections are however limited to the area within the head. As such, it is not possible to display an output over two multiviewer h ...