ZALMAN CNPS9900 Max Operation & User’s Manual

the following precautions www.ZALMAN.com Core i7 Extreme, Core i7, Core i5, Core i3, Core 2 Extreme, Core 2 Quad, Core 2 Duo, Pentium Dual-Core, Pentium D, Pentium 4, Celeron D Zambezi, Llano, Phenom II, Phenom, Athlon II, Athlon X2, Athlon FX, Athlon, Opteron Dual-Core, Opteron, Sempron Intel Socket ...

prevent product damage and injuries. 2) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. 3) To prevent po ...

Thermal Grease [ZM-STG2] Loading Block Side Caps Nuts Double-sided Tape Backplate Resistor Wrench User’s Manual Cooler Silver Bolts B (3mm) (Socket 1156/1155/775/AMD) Silver Bolts A (4mm) (Socket 2011, CNPS9900MAX Only) Gold Bolts (Socket 1366 ) AMD Clip Intel Clip 2) Intel Components 3) AMD Components CNPS99 ...

The cooler’s installation requires unobstructed space with dimensions of 133mm(width), 96mm(length), 154mm(height), and the CPU as a central reference point. Please check if components such as ODDs and PSU protrude into the required space. 2) Air Guide Removal 4) Cooler Orientation 5) Cooler Handlin ...

1) Intel Socket 2011 Installation (CNPS9900 MAX Series Only) !Unfasten the Bolts on the Cooler’s Base one thread, insert the Intel Clip between the Cover and the Base, and then refasten the Bolts. Make sure the Intel Clip’s ingresses DUHÀXVKDJDLQVW the protrusions of the Base Cover. Align Intel ...

X O Caution 2) Intel Socket 1366/1156/1155/775 Installation ᾒInstall Bolts to the Backplate according to the Socket Type and secure with Side Caps. % & ᾓSocket 1366/1156/1155 Installation Attach Double-sided Tape to the center of the ...

Remove the Sticker Cover from the Lower Tier of the Loading Block and attach to the Backplate. Attach Double-sided Tape to the Loading Block and remove the Double-sided Tape Cover. Double-sided Tape Loading Block O Caution Please make note of the orientation of the Loading Block’s Installation. O ...

the motherboard’s Clip Support installation holes and then fasten to the motherboard. M/B Gold Bolt (Socket 1366) Sliver Bolt B (3mm) (Socket 1156/1155/775) ᾖApply a suitable amount of the included Thermal Grease on the CPU’s surface and then fasten the Bolts to install the cooler. C ...

ᾒUnfasten the Bolts on the Cooler’s Base one thread, insert the AMD Clip between the Cover and the Base, and then refasten the Bolts. Make sure the AMD Clip’s ingresses DUHÀXVKDJDLQVWWKHSURWUXVLRQVRI the Base Cover. Caution Align B. AMD Socket Installation ᾓ Install Bolts to the ...

and attach to the Backplate.  Caution Please make note of the orientation of the Loading Block’s Installation. Attach Double-sided Tape to the Loading Block and remove the Double-sided Tape Cover. Loading Block Double-sided Tape O X O X ᾕ Disassemble ...