beevision 270 Operation & User’s Manual
Text of beevision 270 Operation & User’s Manual
BeeVision 270 User Manual v1.3.9
C
Contents
1 Overview ......................................................................................................... 3
2 Installation ...................................................................................................... 3
3 Connection Ports ...................................................
BeeVision 270 User Manual v1.3.9
3
1
1 Overview
This document provides a description of installation, calibration, and usage of
BeeVisionTM 270 dimensioner.
BeeVision dimensioners are equipped with VolumizerTM software that enables users
to easily self-calibrate the device, perform measurements and share results. Users can
use the BeeVision Dimensioners
BeeVision 270 User Manual v1.3.9
BeeVision 270 can be attached to any platform with 5mm screws depicted in FIGURE
2. BeeVision 270 is also delivered with a mounting-bracket that is screwed to the
device and can be used to easily mount the device to sigma-shaped profiles as shown
in FIGURE 3.
FIGURE 2: BEEVISION MOUNT BRACKET
FIGURE 3: BEEVISION 270 MOUNTED
BeeVision 270 User Manual v1.3.9
5
3
3 Connection Ports
FIGURE 4 below shows the connection ports that are located on the backside of the
device.
FIGURE 4: BACK SIDE OF BEEVISION 270
HDMI port: There are two HDMI ports to connect to an external monitor to view
Volumizer user interface (UI).
Even though it may work, it is not recommended to use a USB moni