EtiamPro ECAMIP801 Quick Start Manual

Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ...

Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions: Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Warnings Laws and Regulations The device should be used in compliance with loca ...

Cautions Fire Prevention No naked flame sources, such as lighted candles, should be placed on the equipment. The serial port of the equipment is used for debugging only. Hot Surface CAUTION: Hot parts! Burned fingers when handling the parts. This sticker is to indicate that the marked item can be hot and should not be touched without taking care. Wait one-half hour after switching off before handling parts. The device with this ...

Maintenance If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance. A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan varies, so periodic checking is recommended. Contact your dealer for details. Cleaning Please use a soft and dry cloth ...

Speaker 1 Appearance Name Description Status indicator • Solid red: camera starting up. • Slow-flashing red: Wi-Fi connection failed. • Fast-flashing red: camera exception (e.g. microSD card error). • Fast-flashing blue: camera ready for Wi-Fi connection. • Slow-flashing blue: camera running properly. Lens Microphone Status indicator ...

Name Description Power input Micro USB for power supply, 5 VDC. Plug the power cable into the power input interface to power on the camera. Memory card slot For microSD card. If a memory card is used, video files will be stored in the memory card. You would need to initialize it in the Guarding Vision app. RESET Hold down the button for 4 seconds when the camera is running. Power input RJ-45 self-adaptive Ethernet port Memory c ...

2 Installation 2.1 Install the Memory Card 1. Adjust the tilting position of the camera to expose the removable cover. 2. Open the cover to expose the memory card slot and insert the memory card. 3. Re-install the cover. Removable cover ...

2.2 Install the Camera 1. Take out the drill template from the package. Paste it to the desired mounting place. 2. Drill two screw holes according to the drill template if you sue expansion screws. 3. Take out the adapter from the package. Align the screw holes and fix the adapter. ...

4. Fix the adapter into the camera bottom and rotate the camera base clockwise to get it fixed. 2.3 Adjust the Surveillance Angle 1. Rotate the camera body to adjust the panning position. 2. Move the dome drive upwards or downwards to adjust the tilting position. Dome drive 1. Rotation 2. Tilt: -10° to 90° Camera body ...

3 Operation 3.1 Power On the Camera Connect the camera to the power adapter with the micro-USB cable and then plug the power adapter into the power outlet. When the blue light flashes, the camera is powered on. You can set the Wi-Fi connection. 3.2 Guarding Vision Setup 1. Connect your mobile device to Wi-Fi. 2. Download and install the Guarding Vision app by searching “Guarding Vision” in the App Store or Google Play™. I ...

3.3 Add the Camera to Your Guarding Vision Account NOTE: Start the adding process only when the indicator flashes blue. 1. Connect your mobile phone to a Wi-Fi (5G Wi-Fi is not supported yet). 2. Log into the Guarding Vision app. 3. In the Home page, tap “+” on the upper-right corner to add a camera. 4. Scan the QR code on the bottom of the camera. 5. Follow the prompts to set the network connection and add the camera to yo ...

4.2 Recording 1. Check the memory card status by tapping on the Storage Status in the Device Settings interface. 2. If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal. You can then start recording any event-triggered video in the camera such as motion detection. 4.3 Playback Launch the Guarding Vision app, tap a connected device and tap the Gallery button to play bac ...