ensol ES2H/2.65 Installation Instruction

on flat roof or foundation. Installation instruction for flat solar collectors on flat roof or foundation 01/2019 Read before installation ...

The installation instruction applies to collectors: Flat collector Installation setting Absorber type Absorber material *1 width height depth Collector mass Surface Connecting system Liquid content Optimal flow min. - max. symbol - - - A B C m S - V m unit - - - mm mm mm kg m2 - dm3 ...

1. Introduction Lightning protection installation In the case where the height of the collector installation exceeds 20m and the building is not equipped with lightning protection, all of the electrically conductive elements should be connected to an earth rod (minimal earth rod cros ...

3. Before installation Note Due to the fact, that installation works on a roof can be dangerous it is recommended to hire a roofing contractor company to carry them out. BURN HAZARD If collectors and installation materials are exposed to solar radiation for a long time, there is a ri ...

1.1 Shipment position 2.1 Unloading position 3.1 Transport pallet ready for unloading 3.1 The delivery completeness Before installation it is necessary to check if the delivery is complete (see figure below) and the delivered components are not dam ...

3.1.1 Installation set for vertical collectors 3.1.2 Installation set for horizontal collectors ...

3.1.3 Installation set delivery completeness – flat roof / foundation „on compensator” Flat roof installation set Battery No. Name unit 1 2 3 4 5 6 7 8 9 10 1. Assembly triangle pc. 2 3 4 5 6 7 8 9 10 11 2. Side fastening plate PMB35 pc. 4 4 4 4 4 4 4 4 4 4 3. Inter-collector f ...

3.1.4 The delivery completeness of Installation set – flat roof / foundation „on pipe union” Flat roof installation setInstallation set Battery Lp. No. Name unit 1 2 3 4 5 1. Assembly triangle pc. 2 3 4 5 6 2. Side fastening plate PMB35 pc. 4 4 4 4 4 3. Inter-collector fastenin ...

3.1.5 Vertical collectors Installation set – light version (economical without inclination angle adjustment and bottom strut positioning spacing of the triangle feet) The collation applies to the part of the instruction only for installation of collectors with the surface of 2,0m2 ...

3.1.6 The delivery completeness of Installation set for vertical collectors light version „on compensator”. Installation set – light version Battery Lp. No. Name uni t 1 2 3 4 5 1 Vertical triangle light flat roof pc. 2 3 4 5 6 2 Fastening holder UM114 pc. 2 4 6 8 10 3 Multi-s ...