CDA CI381 Installation, Use And Maintenance Instruction

Safety warnings 7 Recommendations 8 Before first use 10 Detergents and additives 11 Eco note and loading the washing machine 12 Control panel and programmes 13 Programme table 14 Programme details 16 Starting a wash programme & features 21 Choice of detergent 22 Care and maintenance 23 Cleaning the filter 25 Detergent drawer 26 - 28 Practical (cleaning) information 29 Display and fai ...

intended, i.e. domestic use. Any other use could be dangerous and may lead to premature failure of the appliance. The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the ...

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disp ...

mains power supply. If the cord is damaged it should be replaced by the manufacturer or appointed service agent in order to avoid a hazard. If the appliance is damaged, contact your retailer. • To remove the plug from the socket, pull on the body of the plug, not the cable. • Do not plug the appliance in to the mains power supply with wet or damp hands, or w ...

your washing machine, please take the following precautions: • Please read all the instructions before using the washing machine. • Do not wash items that have previously been cleaned, washed, soaked or treated with petrol, solvents for dry cleaning, other inflammable substances or explosives, as they produce fumes that could catch fire or explode. • Do not add p ...

long periods will dry and stick to the detergent drawer. To prevent this put the detergent and softener into the detergent drawer just before washing. • It is recommended that the pre-wash programme should only be used for very dirty clothes. • Do not exceed the maximum loading capacity. • When the machine is not in use, keep the water tap closed. • T ...

When your washing machine has been correctly installed, we recommend that you pre-clean the machine. This is to check that the installation, the connections and the drainage are all correct, and to thoroughly clean the inside of the washing machine before any wash programmes are run. Prior to pre-cleaning you should ensure the transit bolts have been removed. • Select the Cotton 90ºC programme (programme A) and add a normal dose of ...

• Turn garments, such as knitted fabrics, inside out. • Before placing the clothes in the drum, make sure all the pockets are empty. Any small objects may block the drain pump. • We recommend loading the washing machine to its full capacity for best water and energy efficiency. • Whenever possible, we recommend that you wash garments of different sizes within the same wash programme. This improves the wa ...

dispenser has three sections as shown in figure 1. Add the required amount of detergent and fabric softener into the specific sections of the detergent dispenser before starting the wash programme. Note: Compartment 1 (Prewash) is only used with the “Intensive +” programme. The detergent dispenser is designed to allow the use of liquid detergents rather than adding them to the drum. You sh ...

• How heavily the clothes are soiled. • The hardness of the water (Information on water hardness in your area can be obtained from your local water board). We recommend the use of a decalcifying product if the water hardness is high in your area. Eco note The use of more detergent than necessary will not improve your washing results. Many brands of detergent (and fabric softener/ conditioner) cont ...

D Temperature selection button E Spin speed button F Additional functions button G On/off button H Start/pause button Programmes Fig. 2 A B C D E F G H Fig. 3 ...

for each wash programme. Extra Rinse Programme Default Tempera- ture [°C] Max spin speed [RPM] Max load [KG] Additional functions available Detergent drawer Time [h:min] Energy con- sump- tion [WH] Water con- sump- tion [L] Number of rinses Delay Extra rinse Pre- wash Pre- wash Main wash Fabric sof- tener Rapid 15’ Cold water 800 2 ✓ X 00:15 30 34 2 Fast 45’ 40 ...

This programme is best suited for light loads with light soiling on a 15 minute cycle. This programme includes all wash cycles of main wash, rinse and spin Fast 45 min This programme is best suited for light loads with light soiling on a 5 minute cycle Cotton 20 This programme can be used for daily washing where there is very light soiling and only a low temperature is required. The default temperature is 20°C Jeans This ...

spinning commences Anti Allergy This program is designed for washing clothes for people with sensitive skin Wool This programme is suited for woolen items that are clearly labelled as machine washable. Select the appropriate temperature according to the garment’s label(s). Also, ensure you use the correct detergents/ additives Delicate This programme is suited for delicate garme ...

and intensive. The default temperature is 40°C MyChoice Press the ‘Spin speed button’ for approximately 3 seconds for the machine to remember the cycle/setup of your choice (if you have customised temperature, spin speed etc.). The default MyChoice cycle is CottonQ. Once you have created and/or saved a cycle as per the above steps, this will be the MyChoice cycle thencefort ...

programme duration. Spin speed selection Each selected programme has its own preset spin speed, as shown in the programme listing on page 13. If you press the ‘Spin speed button’ the currently set spin speed will show on the display. You can reduce this or switch it off completely if required by pressing the ‘Spin speed button’ a number of times. If you miss the speed you want yo ...

increments to allow the wash programme to finish at a convenient time. The delay time is to the end of the wash programme not the start of the programme. The ‘Delay Timer’ function is not available for the ‘Spin’ programme. To set the delay timer: • Press the ‘Delay timer button’ (written ‘start delay’). • Pressing the ‘Delay timer button’ again i ...

any buttons are pressed accidentally. The lock function should be activated after the wash programme has been selected together with any extra functions. To activate the child lock, press and hold ‘Temperature selection’ and ‘Spin speed’ buttons together for approximately 3 seconds. The display will show the symbol when the child lock is active. To deactivate the ch ...

Energy label program settings: 1. “Cotton+ 40°C+Intensive + Max speed” 2. “Cotton+ 60°C+Intensive + Max speed” The standard 40° and 60° cotton programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumption. The actual water temperature may differ from the declared cycle temperature. Note: The wash cycle times that are quoted ...