Car-Interface CI-VL2-CCC Manual 

Text of the manual

with 10pin LVDS connector

Video-inserter with 2 video + RGB + rear-view camera input and CAN control

1. Prior to installation

1.1. Delivery contents 1.2. Checking the compatibility of vehicle and accessories 1.3. Dip-switch settings 1.3.1. Vehicle selection (dip 6-8) 1.3.2. Enabling the interface’s video inputs (dip 1-3) 1.3.3. Rear-view camera settings (dip 5) 2. Installation 2.1. Place of installation 2.2. Co

 RGB-input for after-market navigation

 2 video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner, …)  Built-in audio-switch  Rear-view camera input, automatically switching  Factory rear-view camera compatible  Switching of video through factory infotainment buttons  Swi

Monitor with 10pin LVDS video connector

Vehicle 3series (E90/91/92), 5series (E60/61), 6series (E63/64), X5 (E70), X6 (E71), and other vehicles Navigation/Radio Professional Navigation CCC Business Navigation M-ASK up to about 2009 Radio with colour screen Limitations Ultra-wide mode Only available for

1.3.2. Enabling the interface’s video inputs (dip 1-3)

Only the enabled video inputs can be accessed when switching through the video sources. It is recommended to enable only the required inputs for the disabled will be skipped when switching through the video interfaces inputs. 1.3.3. Rear-view camera settings (dip 5)

10pin HSD LVDS

female connector of interface harness Pin-definition white 6pin power connector Pin 1 (yellow) - ACC or Battery +12V Pin 2 (red) - ACC +12V Pin 3 (grey) - IR data Pin 4 (black) - Ground Pin 5 (gre

Installation procedure – function check

Follow the below procedure using the “Connections” scheme from chapter 2.2. as reference. Before the installation of the sources and the interface we recommend a first quick connection of the interface and test run to ensure that vehicle and product are compatible. Due to

This interface can only insert video into the factory infotainment. The video can be activated

to any audio mode of the factory infotainment. If an AV-source is to be connected, the source’s video out is connected to the video IN1 of the video interface and the source’s audio out to the audio inser

3. Interface operation

3.1. By factory infotainment buttons Some of the factory buttons can be used to execute interface functions. Press knob to the left (more than 1 second) to activate the interface video. Each press (more than 1 second) will switch to the next enabled input. If all inputs are enabled the order is: Fact

More Car-Interface Automobile Accessories Owners Instructions: