Daewoo 103FH Operation & User’s Manual
Text of Daewoo 103FH Operation & User’s Manual
1. Read all of these instructions.
2. Save these instructions for later use.
3. Unplug this monitor from the
wall outlet before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
4. Do not use attachments not recommended by
the monitor manufacturer as they may cause
hazards.
5. Do not use this monitor near water, e.g., near a
bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool,
Bitte lesen Sie alle diese Informationen, bevor Sie das Gerät in Betrieb
nehmen! Lesen Sie sich außerdem die Bedienungsanleitung komplett
und sorgfältig durch, da nur in diesem Fall eine problemlose
Inbetriebnahme erwartet werden kann.
• Achten Sie darauf, daß das Gerät nur in eine 230V Schuko-
Steckdose eingesteckt wird.
• Die Steckdose sollte jederzeit frei zugänglich sein um bei einem
evtl. auftretenden Notfall das Gerät schnell vom Netz zu
Emission Characteristics Tested by SEMKO
A sample of this type has been tested and has shown compliance with
theguidelines in the swedish document MPR II.
This product is also designed for IT power system with phase to phase
voltage of 230V.
The power cord is used as a main disconnect device. Disconnect the
power cord before servicing. The outlet must be installed near the
monitor and must be easily accessible.
As an ENERGY STAR® Partner, Daewoo El
Introduction ............................................................................. 1
Product Features ................................................................. 2
Setup ......................................................................................... 3
Connecting the D-sub Signal Cable .................................... 3
Connecting the BNC Signal Cable ..................................... 4
Connecting the Power Cord .............
• The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of horizontal and vertical
screen size and position, geometry and screen color.
• The monitor supports a safe working environment in strict
compliance with the MPR II standard for low emissions
(TCO optional).
• The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitr
English - 4
English - 5
CONNECTING THE POWER CORD
1. Plug the power cord into the AC receptacle located at the back
of the monitor.
2. Plug the other end of the power cord into the AC outlet.
POWER MANAGEMENT SYSTEM
If you use the monitor with a computer that complies with the
power-saving program, you can set the monitor to go blank when
the system has remained unused for a period of time. To specify
the period or to disable this feature, set the system
English - 6
English - 7
Key Process
Start
MENU
• When you choose the icon on the OSD window, you can exit the
OSD screen.
OPERATION & ADJUSTMENT
Control Panel
• Move cursor to the right window on the OSD
window.
• Increase the value of any selected function.
• Move cursor to the left window on the OSD
window.
• Decrease the value of any selected function.
• Launch OSD(On-Screen Display) MENU
English - 8
English - 9
Adjust the vertical picture moire
cancellation.
V. MOIRE
Adjust the focus image.
FOCUS
H.CONVERGENCE Adjust the horizontal convergence image.
V.CONVERGENCE Adjust the vertical convergence image.
ZOOM
Adjust the display width & height at the
same time.
Adjust the left and right margins for more
convex or more concave margins.
Adjust the trapezoid of the screen by
moving the lines inward or outward.
Adjust the side balance when the si