Baxton Studio FREDA DAYBED-F Assembly Instruction

Text of Baxton Studio FREDA DAYBED-F Assembly Instruction

M8 x 20MM

L - KEY M5 x 65MM 1PC 1PC 4PCS 2PCS 14PCS STEP 1 STEP 2 1 2 3 4 5 F G FREDA DAYBED-F/FREDA DAYBED-Q 6 SIDE PANEL (R) Please do not tighten the hardware until the entire assembly is completed. 7 8 SLAT 2 SET JCBC SCREW M6 x 40MM SPRING WASHER FLAT WASHER L - KEY M4 x 65MM SCREW M4 x 32MM 12PCS 1PC 1PC H E 9 A 7pcs B CENTER SUPPORT SUPPORT LEG 4PCS BACK

Please do not tighten the hardware until the entire assembly is completed.

Secure 2 Support Leg (9) to the Center Support (8) as shown on step 3.1. Tighten the Support Leg (9) clockwise until secure. Insert the pre-set metal on Center Support (8) to the metal bracket on each side of Side Panel (2) & (3) as step 3.2. Then securing the metal bracket as shown in step 3.3 with 1 Screw (F) each side using Phillips Head Screwdriver (NOT INC

Baxton Studio Indoor Furnishing Owners Instructions: