Bakeey TS-WP10 Operation & User’s Manual

Display of all functions S M AM PM 1 2 H AL o L AL MIN MAX H AL o L AL MIN MAX 1 ...

Time display mode Countdown display mode S M H AL o L AL H AL o L AL H AL o L AL MIN H AL o L AL MIN AM 1 Temperature Humidity Max./Min. values Alarm icon Alarm clock icon Snooze icon Time icon A.M./P.M. Time display Dynamic clock Countdown Minute Second Countdown icon Dynamic seconds countdown Temperature unit 2 ...

Mode selection Beyond -limit alarm settings View max./min. values Forward adjustment Backward adjustment °C/°F switch + + Foldable support Revolving clip-on rear cover Wall mounting hole Transparent silicone suction cup 3 ...

user’s guide for operations is given as follows: 1.Major functions: Hour, minute, second, temperature, humidity, and simulated time are displayed on the same screen Two alarm clocks Snooze function: Five minutes by default Countdown function Dynamic countdown progress bar indicator Dynamic seconds c ...

Temperature/Humidity calibration function Waterproof grade: IPX4 1. Power supply through USB DC power cable(when the DC cable is plugged in, the backlight indicator turns on for 8 seconds, and then automatically dies out if no buttons are pressed. To keep the backlight i ...

batteries). Remarks: This clock is shipped without batteries. + + MODE + - ALERT MAX MIN C/F 1.5V SIZE “AAA”/AM4 LRO03 1.5V SIZE “AAA”/AM4 LRO03 1.5V SIZE “AAA”/AM4 LRO03 USB DC power cable AAA battery * 3 6 ...

When this clock is powered on, the LED is fully displayed for 3 seconds, and the backlight color alternates in the order of red, orange, and white for one cycle. The initial interface of the system is displayed after a beep sound. Default display after startup: white backlight Time: 0:00 Default time format: 24 hours Default ...

In the time display mode, jump to the setup page by long pressing [MODE], when the parameters to be set up are displayed and flashing; the setup sequence is: 12HR/24HR→hour→minute→exit and return to normal time display. In time settings, short press [＋] if you want to add the value by 1 or long press [ ] for quick increase ...

short pressing [＋]. During setting, select 1 alarm clock and long press [MODE] for at least 3 seconds, when the Hour place starts flashing; then short press [MODE] and the Minute place starts flashing. Short press [＋] if you want to increase the value by 1, or long pres ...