2connect CAM-FT6 Operation & User’s Manual

Text of 2connect CAM-FT6 Operation & User’s Manual

720 x 480 (Wide Angle View)

- Picture Mode NTSC - CMOS Chipset: 1/3” - Lens FOV: 210 Degrees (H) x 140 Degrees (V) - Viewing Angles: Birds-Eye, Wide Angle, Reversing Left/Right Blind Spot, Driving - Waterproof Rating: IP67 - Parking Guidelines Yes (Removable/Dynamic) U s e r M a n u a l Prior to Installation Read the manual prior to installation. Technical knowledge is necessary for installation. Please ensure you use the c

2connect CAM-FT6 Make Connections to Vehicle/Unit

Camera replaces OEM brake light Control Unit Wireless Controller (Mount on dashboard) Control Unit Extension Cable Power Adapter Cable Vehicle Connection Overview Wiring Diagram INSTALLATION 1 Red Acc 12V Connect to vehicle 12V Accessory feed 2 Black Ground Connect to ground 3 Green Reverse Trigger Connect to vehicle reverse trigger output 4 Blu

USING THE WIRELESS CONTROLLER

The wireless controller included in the kit can be used to change the viewing mode of the camera, as well as adjust key parameters for each viewing mode. To bring up the HUD menu, put the vehicle into reverse gear and press A. Note: The HUD menu will time-out after 3 seconds to allow an unin- hibited view of the camera image. Press the A button to bring the HUD menu back onto the screen The

To adjust settings for all viewing modes, press A from the HUD menu to enter the settings menu.

Once in the settings menu, short press A to cycle through the various settings screens available. Screens include camera angle and position for each mode, and guideline width for parking lines. Once in a settings screen, the selected setting is indicated by the icon in the centre of the display. The paramete

2connect Automobile Accessories Owners Instructions: