CBT Supply EZ Cinch Installing
Text of the manual
EZ Cinch Body with
Ratchet and Straps
Ratchet Wrench
(Ships stowed in EZ Cinch body)
Locking Pin
(You may substitute your own padlock or cable tie).
EZ Cinch is an adjustable CPU holder
system that works with a wide range
of CPU sizes, from small form factor
to full sized tower.
The hardware provided lets you
install under any tab
Using wood screws provided,
install the mounting bracket on the
underside of the table.
The mounting bracket has 4
studs into which the EZ Cinch body
will slide and lock. The bracket
positions the EZ Cinch at an ideal
height for easy access to drives
and cable connections.
Install Mounting Bracket
The Mounting Bracket is designed to work with
the HorizonLin
Tuck In the Straps
The straps are longer than you
will need, so gather up the
excess and tuck it into place as
shown for a neat installation.
Hang EZ Cinch on
Mounting Bracket
Capture the mounting studs
in the slots on the top of the
EZ Cinch body. Slide into
position, placing the locking
tab through the slot on the
back of the mounting bracket.
Interlock E
Small form factor CPUs, full sized towers,
even contoured CPU cases are no
problem for EZ Cinch. Straps easily
adjust and conform to any size case.
Keep you CPUs off the floor, protected
from building maintenance hazards.
Have full IT access to drives
and connections.
©2007 CBT Supply, Inc.
All rights reserved.
For technical support,
please contact technic