Dataman S6 Operation & User’s Manual

Contents Chapter 1 Product Description 1-1 Introduction 1-2 Safety Information 1-3 Precautions 1-4 Operating System, Hardware Requirements 1-5 Accessories Chapter 2 Product Installation 2-1 Hardware Installation 2-2 Software Installation 2-3 Driver Installation Chapter 3 IC Insertion 3-1 General IC Insertion (DIP package) 3-2 Speci ...

4-5-4 Confirm Error List 4-5-5 Programming Area Selection 4-5-6 Message Column Settings 4-5-7 Self-Test Function 4-5-8 Device Options 4-6 Save 4-6-1 Save File Path and Name 4-6-2 Save File Format 4-6-3 Buffer Range for Saving 4-7 Device Processing Procedure 4-7-1 Read 4-7-2 Data Confirm 4-7-3 Erase 4-7-4 Blank Check 4-7-5 Program 4 ...

Chapter 1 Product Description 1-1 Introduction With 30 years experience Dataman is the world’s leading provider of device programmers. We offer a comprehensive range of programming solutions suitable for every requirement from design and development to large scale production. We are committed to providing continued development, m ...

b) If you need adapters for other kinds of IC package (for example, TSOP, PLCC, TQFP, QFN ... etc.) we would advise that you contact Dataman. Do not use inferior quality adapters or try to create adapters yourself. The Dataman-S6 programmer communicates with the IC using a high-frequency signal. If external adapters are of poor qua ...

Power Requirements: 2 x USB Ports providing +5 V power supply Dimensions: 130 (L) x 90 (depth) x 20 (high) mm Note: Height does not include ZIF Socket Weight: 290g Operating temperature: +5 to +45 ℃ ℃ 1-5 Accessories Programmer: 1 Special Y-USB cable: 1 CD-ROM (software and manual): 1 3 StockCheck.com ...

Chapter 2 Product Installation 2-1 Hardware Installation 1. Use the supplied Y-type USB cable connected two USB ports on the host computer. If you use an external USB Hub, please connect it to a power adapter rated at (5V,> 1A or above), and remove any other USB powered devices such as external hard drives...and so on. 2. The blue ...

3. The path is set to "C:\Dataman Programmers\USBDrv" (Check the item “Include this location in the search”.) 4. After installation, you will see the the "Dataman-S6” device listed under “Device manager”- Control Panel \ System \ Hardware \ Device Manager. This shows that the installation was successful. 6 check this item ...

7 This icon represents successful driver installation Press [Finish] To Complete the installation StockCheck.com ...