Daintree GE Current WOS2-CM Installation Manual

Read these instructions completely and carefully. Save these instructions for future use. 1 Installation Process Installation Guide WOS2-CM | DT108 Risk of electrical shock. Disconnect power before servicing or installing product. Install in accordance with National Electric Code and local codes. WARNING Risk of injury. Wear safe ...

2 2 Joining the ZigBee Network 3 Placement 1 Installation Process (continued) LED Operation A. Walk test the sensor. Walk outside the coverage area and wait for the red LED to stop flashing. Step inside the desired coverage area and observe the red LED. B. Repeat ...

3 Placement (continued) 4 Adjustments 5 PIR Sensitivity Installation Height Detection Angle Detection Radius 10’ (3m) from floor 120° up to 17’ (5.2m) Coverage Pattern, WOS2-CM-E, Extended Coverage • The PIR sensor must have clear line of sight to the coverage a ...

or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be r ...