Edge EDB12TA-E2 Owner's Manual

Text of the manual

Congratulations on purchasing your FLI bass enclosure. Please read this manual in order to fully

understand how to get the best results from this product and ensure that all advice on how to look after the product is followed. Thank you for buying FLI, we hope you enjoy listening to your product as much as we enjoyed creatin

All EDGE products carry a full 12 month warranty, valid from the date of the original

receipt and proof of purchase. The online warranty card should be completed within seven days of the original purchase date. The original receipt and packaging should be retained for this twelve month period. If the product develops a problem any stage du

Your FLI enclosure is designed with a swift installation routine in mind.

Before fixing the enclosure in place please ensure that there is sufficient air flow around the exterior of the amplifier casing, at least two inches is sufficient. • At least 10 gauge cable should be used for the power connection t

REMOTE TURN ON CABLE

RCA CABLES AUTO TURN ON (HIGH LEVEL INPUT ONLY) • At least 10 gauge cable should be used for the ground connection to the amplifier. • The amplifier ground should be connected directly to the chassis of the vehicle, to bare metal. • The cable length should be kept to an absolute minimum. • It is not rec

TERMINALS AND CONNECTIONS

1. Fuse EDB10A / EDB12A: ensure a 20 amp fuse is fitted, never fit a fuse with a rating higher than 20 amps. EDB12TA: ensure a 25 amp fuse is fitted, never fit a fuse with a rating higher than 25 amps. 2. Power Input Terminals See Power Connections on Page 4 for more details 3. Power/protection LED’s When the

The most common place to mount a bass enclosure is in the luggage compartment of the vehicle.

Where in the luggage compartment it is mounted will have an effect on the sound produced, allowing the user to tailor the sound to suit their musical tastes. For example, if the enclosure is mounted facing the rear bumper the bass produced will be not

RUN IN PROCEDURE

SET UP SECTION FLI recommends that you follow the run in procedure for the subwoofer detailed below. • When your subwoofer is used for the first time, naturally like most brand new items it is very stiff and rigid. It will take time for the moving parts of the subwoofer to loosen up before the subwoofer is ready to deliver it’s ful

AMPLIFIER WILL NOT POWER UP

PROTECTION LED IS ILLUMINATED BLOWN FUSES DISTORTED SOUND • Check for good ground connections. Ensure that the ground cable is connected directly to bare metal and not a painted surface • Using a multimeter ensure that the remote (REM) terminal has at least +12v DC. • Using a multimeter ensure that the Ba

UK TECHNICAL ENQUIRIES

INTERNATIONAL TECHNICAL ENQUIRIES For international technical support please contact the distribution agent for your country. Please visit www.edgecaraudio.com/ for more details. Call 09067031420 Calls cost 50p per minute. Call costs correct at date of publication (01/02/12) Hours of business 9.00am - 5.30pm GMT Monday - Friday. All

Other Enclosure Manuals