Eco-Systems ECO-2003 Setup Instructions
Text of Eco-Systems ECO-2003 Setup Instructions
ECO-2003 - 10’ x 20’ Display
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
SETUP INSTRUCTIONS
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection
Base Plate & Extrusion Connection
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation
Step 1 of 3
Order #XXXXX
Item
Qty
Description
1
4
Base Plate
2/2a
2/2
42” OP91 Vertical Extrusion
3/3a
2/2
42” OP91 Vertical Extrusion
4/4a
1/1
44” RSG531 Vertical Extrusion
5/5a
1/1
44” RSG531 Vertical Extrusion
6a/6b 2/2
29.5” Z45 Curved Horizontal Extrusion
7a/7b 2/2
29.5” Z45 Curved Horizontal Extrusion
8a/8b
2/2
38” Z45 Horizontal Extrusion
9/9a
1/1
46.126” Z45 Horizontal Extrusion
10
1
46.126” Z140 Horizontal Extrus
Step 2 of 3
Order #XXXXX
Steps:
1) Attach base plates to bottom of verticals [11,11a] see Detail D on General Instruction page.
2) Connect verticals [11,11a] to backwall structure using horizontal extrusions [12].
3) Connect header pieces [13a/13b, 14a/14b, 15, 16 and 17] together as shown.
**Velcro must face forward and must be attached on edges of frame.**
4) Connect assembled header between vertical assemblies as shown.
1
11
1
11a
13a
13b
14
Step 3 of 3
Order #XXXXX
Steps:
1) Attach lights to top of backwall as shown.
2) Attach large monitor mount to horizontal [10] as shown in detail.
3) Attach small monitor mounts to verticals as shown in detail.
4) Attach shelves to verticals as shown in detail.
*
*
*
*
*
*
*
*
*
*
*
Small Monitor
Mount Attachment
Shelf Attachment
Attach back plate to connectors
on vertical extrusion using screws.
Then attach top plate and tighten
setscrews to secur