Coaster 801304 Assembly Instructions Manual

Text of Coaster 801304 Assembly Instructions Manual

COASTER FINE FURNITURE

Fine Furniture for every stage of life REVISION 0 : 08/18/2017 PAGE 1 OF 7 COASTERFURNITURE.COM BOOKCASE 801304 REVISION 1 : 08/10/2020

1. Remove hardware from box and sort by size.

2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. 1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial

PAGE 3 OF 7

HARDWARE IDENTIFICATION 1 BOLT (3/16" x 50mm) 8PCS 12PCS CAP (10 x 20mm SR) BOTTOM CAP (20 x 20mm BLK) 2 3 4PCS 20PCS LED BOLT (3/16" x 21mm) LED COVER (∅5 x 10mm) 4 5 20PCS 1PC ALLEN WRENCH (3mm) 6 Hardware pack is located in 801304B2

PAGE 4 OF 7

ASSEMBLY INSTRUCTIONS 801304 ITEM: STEP 1 STEP 2 Do not tighten until each step is completed or instructed. 2 2 2 2 2 2 1 1 1 1 D C D D 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 3 3 F 4 4 E 2 2 2 2 2 2 1 1 1 1 D C D D 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 E

PAGE 5 OF 7

ASSEMBLY INSTRUCTIONS 801304 ITEM: STEP 3 STEP 4 A B B B B COMPLETE

PAGE 6 OF 7

ASSEMBLY INSTRUCTIONS 801304 ITEM: Note : Dimension tolerance ±5% 63" 1600 mm 59" 1500 mm 13 3 4" 349 mm Product Size : 1500 X 349 X 1600 H (MM) Product Size : 59" X 13 3 4" X 63" 1500 880 349 1600 313 160 295 295 295 295 160

This tip restraint must be attached to a wall

STEP 2 stud using long screw enclosed. STEP 1 STEP 3 Attach a bracket securely to the back top rail of the furniture using short screw provided, through the smaller hole. Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of the furniture. Attach the wall stud using the long screw provided, through the smaller hole. PAGE 4 OF 4 COASTERFURNITURE.CO

Coaster Indoor Furnishing Owners Instructions: