BN Thermic SMH-45 Instructions
Text of the manual
Thank you for purchasing a BNThermic product. Manufactured to a high standard, this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
1.1 ELECTRICAL SAFETY
WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the foll
3. MOUNTING INSTALLATION
3.1
CEILING MOUNTING
IMPORTANT! Ensure that the ceiling is capable of taking the weight of the heater.
For optimum results do not fit in ceilings higher than 3m. Air is taken in through the large grille and discharged through the smaller grille. The air intake
and discharge areas must be kept completely clear for a minimum of 1.5
4.2 230V SINGLE PHASE – With Thermostat (RST-TP).
Please make sure you have read the Safety instructions and that you are a suitably qualified electrician before continuing.
Drawings show connections inside the black terminal box on the outside of the heater and the inside of the RST-TP Thermostat. Other thermostats
may be used BUT they must be suitable fo
230V SINGLE PHASE – With CS-1 Controller and RST-TP Thermostat.
Please make sure you have read the Safety instructions and that you are a suitably qualified electrician before continuing.
Drawings show connections inside the black terminal box on the outside of the heater and the inside of the CS-1 and RST-TP Thermostat Controllers.
Other thermostats m
